HSC Study

Using Brønsted–Lowry Theory

The pH scale and self-ionisation of water, calculating pH, pOH, [H₃O⁺] and [OH⁻], weak acids with Ka and percentage ionisation, strength versus concentration, conjugate pairs and the amphiprotic salts NaHCO₃ and KH₂PO₄, salt hydrolysis, and pH after dilution or mixing.

80 min · Module 6: Acid/Base Reactions

Assumes you have read Properties of Acids and Bases.

The full teaching. Start here.

The short version

Formulas at 25 °C:

  • and .
  • .
  • , so .

Strength and concentration are different things.

  • Strength is how far the acid ionises, measured by . Strong acids ionise completely.
  • Concentration is how much acid there is, in mol L.

Weak acids: .

Amphiprotic ions. HCO₃⁻ and H₂PO₄⁻ can both donate and accept a proton. Compare with to predict the pH:

  • NaHCO₃ solution is mildly basic.
  • KH₂PO₄ solution is acidic.

Mixing an acid and a base.

  1. Find the moles of H⁺ and of OH⁻.
  2. Subtract to find which is in excess, and by how much.
  3. Divide the excess by the total volume.
  4. Take the log.

Dilution. A tenfold dilution of a strong acid raises the pH by 1.

pH and the self-ionisation of water

Water is amphiprotic, and it ionises very slightly:

At 25 °C, the ion product is .

  • In pure water, both concentrations are mol L, so the pH is 7.
  • In an acidic solution, . The product is still .

Sørensen introduced pH so that these very small numbers are easier to work with.

Measuring pH. Use universal indicator, a pH probe, or a meter. Calibrate the meter with buffers first, and rinse the probe between samples.

Significant figures. The number of decimal places in a pH value equals the number of significant figures in the concentration.

Worked example2 marks

From a base concentration to pH

Calculate the pH of 0.0050 mol L Ba(OH)₂ at 25 °C.

[OH⁻]

Ba(OH)₂ is a strong base, and each formula unit releases 2 OH⁻.

mol L.

pOH, then pH

pH + pOH = 14.

, so .

Answer

pH = 12.00.

CheckpointAnswer before reading on.

Which statement about pure water at 25 °C is correct?

Select one answer

Hint 1.

Hint 2.

Hint 3In pure water the two ions are equal.

CheckpointAnswer before reading on.

Calculate the pH of a solution with mol L.

Hint 1.

Hint 2Use the log button, then change the sign.

Hint 3The answer is between 2 and 3.

CheckpointAnswer before reading on.

A solution has pH 4.30. Calculate as a multiple of mol L.

Hint 1.

Hint 2.

Hint 3Express in the form a × 10⁻⁵.

CheckpointAnswer before reading on.

mol L (two significant figures). How should the pH be reported?

Select one answer

Hint 1The digits before the decimal point come from the power of ten.

Hint 2Decimal places in pH = significant figures in the concentration.

Hint 3−log(3.0 × 10⁻⁴) = 3.5229.

Exam question

Standard · about 3 min

2 marks

Calculate the pH of 0.020 mol L NaOH at 25 °C.

Hint 1NaOH is a strong base: [OH⁻] = 0.020.

Hint 2pOH = −log[OH⁻].

Hint 3pH = 14 − pOH.

Where students lose marks on this one
  • Giving pOH as the answer.

    Why it happens: −log[OH⁻] is pOH.

    Subtract from 14.

Written for this site.

Exam question

Standard · about 3 min

2 marks

Calculate the pH of 0.0050 mol L at 25 °C.

Hint 1Each Ba(OH)₂ releases two OH⁻.

Hint 2[OH⁻] = 0.010.

Hint 3pOH = 2.00.

Where students lose marks on this one
  • Using [OH⁻] = 0.0050.

    Why it happens: Ba(OH)₂ has two hydroxides.

    Double it.

Written for this site.

Exam question

Standard · about 3 min

2 marks

A solution has pH 9.50 at 25 °C. Calculate as a multiple of mol L.

Hint 1pOH = 14 − 9.50.

Hint 2.

Hint 3.

Where students lose marks on this one
  • Using 10^(−9.50).

    Why it happens: That is [H₃O⁺].

    Find pOH first.

Written for this site.

Strength, concentration and pH

A strong acid, such as HCl, HNO₃ or the first proton of H₂SO₄, ionises completely. So equals the acid concentration.

A weak acid, such as CH₃COOH, HF or H₂CO₃, reaches an equilibrium in which most of the acid stays un-ionised:

This approximation relies on two assumptions from your notes:

  • hardly changes from its starting value;
  • water's own contribution to is negligible.

To compare strengths by experiment, measure the pH of acids at the same concentration. The weaker acid has the higher pH.

Worked example3 marks

pH and percentage ionisation of a weak acid

Calculate the pH and the percentage ionisation of 0.10 mol L ethanoic acid, which has .

[H₃O⁺]

Use the weak-acid approximation.

mol L.

pH

Take −log.

pH = 2.87. For comparison, 0.10 mol L HCl has pH 1.00.

% ionisation

Ionised amount divided by starting concentration.

.

Answer

The pH is 2.87. Only about 1 in 75 molecules is ionised.

CheckpointAnswer before reading on.

0.10 mol L HCl has pH 1.0, but 0.10 mol L ethanoic acid has pH 2.9. What does this show?

Select one answer

Hint 1The concentrations are equal.

Hint 2A higher pH means less H₃O⁺.

Hint 3So less ionisation.

CheckpointAnswer before reading on.

Which describes 10 mol L⁻¹ ethanoic acid?

Select one answer

Hint 1Concentration is the amount per litre.

Hint 2Strength is the extent of ionisation.

Hint 3These are independent.

Exam question

Harder · about 5 min

3 marks

Calculate the pH of 0.10 mol L ethanoic acid, .

Hint 1 with [HA] ≈ 0.10.

Hint 2.

Hint 3Then take −log.

Where students lose marks on this one
  • Treating it as a strong acid (pH 1.00).

    Why it happens: Only a small fraction ionises.

    Use Ka.

Written for this site.

Exam question

Harder · about 5 min

3 marks

A 0.050 mol L solution of a weak monoprotic acid has pH 3.00. Calculate , as a multiple of .

Hint 1.

Hint 2.

Hint 3.

Where students lose marks on this one
  • Using [HA] = [H₃O⁺].

    Why it happens: Most of the acid stays un-ionised.

    [HA] ≈ 0.049.

Written for this site.

Exam question

Standard · about 3 min

2 marks

In 0.10 mol L ethanoic acid, mol L. Calculate the percentage ionisation.

Hint 1% ionisation = [A⁻]/[HA]initial × 100.

Hint 2[A⁻] = [H₃O⁺].

Hint 30.00134/0.10.

Where students lose marks on this one
  • Dividing by 1.34 instead.

    Why it happens: Ionised fraction over initial concentration.

    Small over large.

Written for this site.

Exam question

Standard · about 5 min

3 marks

Outline an investigation that uses pH to distinguish between a strong acid and a weak acid, identifying the variables to control.

Hint 1What must be the same for a fair comparison?

Hint 2How will pH be measured accurately?

Hint 3What result is expected?

Where students lose marks on this one
  • Comparing acids of different concentration.

    Why it happens: Concentration also changes pH.

    Keep concentration fixed.

Written for this site.

concentrated, strongdilute, strongconcentrated, weakdilute, weakH₃O⁺A⁻HA (not ionised)
A particle model of four acid solutions, each the same volume. Concentration is the number of acid particles in the beaker; strength is the fraction of them that has ionised. A concentrated weak acid can contain more H₃O⁺ than a dilute strong one, even though it is weaker.

Exam question

Harder · about 7 min

4 marks

Describe a particle model (such as a beaker diagram) that shows the differences between a concentrated strong acid, a dilute strong acid, a concentrated weak acid and a dilute weak acid.

Hint 1Strong: every HA shown as H₃O⁺ and A⁻.

Hint 2Weak: mostly intact HA with a few ions.

Hint 3Concentrated: many acid particles; dilute: few.

Where students lose marks on this one
  • Showing a dilute acid as weak.

    Why it happens: Dilution changes the number of particles, not the fraction ionised much.

    Separate the two ideas.

Written for this site.

Worked example4 marks

Using the particle model to rank four acids

Four solutions are prepared: 1.0 mol L HCl, 0.0010 mol L HCl, 1.0 mol L CH₃COOH and 0.0010 mol L CH₃COOH (). Describe how a particle model would represent each, and use it to rank them from lowest to highest pH.

Concentration in the model

Concentration is how many acid particles are drawn.

The two 1.0 mol L beakers are drawn with many acid particles; the two 0.0010 mol L beakers with very few.

Strength in the model

Strength is the fraction of those particles that has ionised.

In both HCl beakers every particle is drawn as separate H₃O⁺ and Cl⁻. In the ethanoic acid beakers almost every particle is an intact CH₃COOH molecule. At 1.0 mol L only about 0.4% is ionised, and even at 0.0010 mol L only about 13%.

Calculate [H₃O⁺]

Strong: equals c. Weak: √(Ka c), or solve the quadratic when ionisation is not small.

  • 1.0 mol L HCl: , pH 0.00
  • 1.0 mol L CH₃COOH: , pH 2.37
  • 0.0010 mol L HCl: , pH 3.00
  • 0.0010 mol L CH₃COOH: , pH about 3.9

Answer

From lowest to highest pH: concentrated strong, concentrated weak, dilute strong, dilute weak. The model shows why the concentrated weak acid beats the dilute strong acid: even a small fraction of many particles gives more H₃O⁺ than all of a few particles. "Strong" and "concentrated" describe different things.

Polyprotic acids

Sulfuric acid's first ionisation is complete. Its second, , is only partial. So 0.10 mol L H₂SO₄ has and a pH of about 0.96. That is lower than for HCl at the same concentration, but not as low as the 0.70 you would get if both protons ionised completely.

For simple calculations, questions often tell you to assume complete ionisation. Follow whatever the question says.

CheckpointAnswer before reading on.

Why is the pH of 0.10 mol L (about 0.96) lower than that of 0.10 mol L HCl (1.00), but not as low as 0.70?

Select one answer

Hint 1The first ionisation of H₂SO₄ is complete.

Hint 2HSO₄⁻ is a weak acid.

Hint 3pH 0.70 corresponds to [H⁺] = 0.20.

Conjugate pairs, amphiprotic ions and salts

A conjugate acid and its conjugate base differ by exactly one proton. When you write ionisation equations, show water as the proton acceptor (or donor), and use ⇌ for weak species.

An amphiprotic ion can go either way. To predict whether its solution is acidic or basic, compare how strongly it acts as each:

IonActing as an acidActing as a baseSolution
HCO₃⁻ (from NaHCO₃), , : mildly basic
H₂PO₄⁻ (from KH₂PO₄), , : acidic

Salts made by neutralisation:

Acid and baseSolutionWhy
strong acid + strong baseneutrale.g. NaCl: neither ion reacts with water
strong acid + weak baseacidice.g. NH₄Cl: NH₄⁺ donates protons to water
weak acid + strong basebasice.g. CH₃COONa: CH₃COO⁻ accepts protons from water
weak acid + weak basedependscompare with

CheckpointAnswer before reading on.

Which equation shows the ionisation of hydrofluoric acid (a weak acid) in water?

Select one answer

Hint 1HF is a weak acid.

Hint 2Weak acids form an equilibrium.

Hint 3Water accepts the proton.

CheckpointAnswer before reading on.

What is the conjugate base of ?

Select one answer

Hint 1A conjugate base has one fewer proton.

Hint 2Remove one H⁺.

Hint 3Charge decreases by 1.

CheckpointAnswer before reading on.

For , (acting as an acid) and (acting as a base). Is a sodium hydrogen carbonate solution acidic, neutral or basic?

Select one answer

Hint 1Compare Ka and Kb.

Hint 2Which reaction goes further?

Hint 3Na⁺ does not affect pH.

CheckpointAnswer before reading on.

Which salt forms a basic solution in water?

Select one answer

Hint 1Salt of a weak acid and a strong base gives a basic solution.

Hint 2Ethanoate is the conjugate base of a weak acid.

Hint 3It accepts protons from water.

Exam question

Standard · about 4 min

2 marks

Write equations showing the amphiprotic nature of the hydrogen carbonate ion, , in water.

Hint 1As an acid it donates H⁺ to water.

Hint 2As a base it accepts H⁺ from water.

Hint 3Use equilibrium arrows.

Where students lose marks on this one
  • Writing only one equation.

    Why it happens: Amphiprotic means both roles.

    Show donating and accepting.

Written for this site.

Exam question

Harder · about 5 min

3 marks

Potassium dihydrogen phosphate, , is amphiprotic. For , and . Write equations for both behaviours and predict whether its solution is acidic or basic.

Hint 1Acid: donates to water, forming HPO₄²⁻.

Hint 2Base: accepts from water, forming H₃PO₄.

Hint 3Compare Ka and Kb.

Where students lose marks on this one
  • Predicting from the formula alone.

    Why it happens: Use the constants.

    Compare Ka with Kb.

Written for this site.

Common mistake

NaHCO₃ contains an acidic hydrogen, so its solution must be acidic.

Why it happens: The formula looks like a partly neutralised acid.

What matters is which reaction with water goes further. For HCO₃⁻, is about 500 times larger than , so it acts mainly as a base, and the solution has a pH of about 8. That is why baking soda neutralises acids. Always compare the two constants.

Dilution and mixing

Dilution. Use to find the new concentration of H⁺ or OH⁻, then take the log.

Mixing. Neutralisation happens first. After that, only the reagent in excess sets the pH.

Worked example3 marks

pH after mixing

20.0 mL of 0.100 mol L HCl is mixed with 30.0 mL of 0.100 mol L NaOH. Find the pH at 25 °C.

Moles

n = cV.

mol and mol.

Excess

Neutralisation consumes H⁺ and OH⁻ in a 1 : 1 ratio.

mol of OH⁻ is left over, in 50.0 mL. So mol L.

pH

Find pOH first.

pOH = 1.70, so pH = 12.30.

Answer

pH = 12.30.

Exam question

Standard · about 3 min

2 marks

10.0 mL of HCl with pH 1.00 is diluted with water to 1.00 L. Calculate the new pH.

Hint 1[H⁺] = 0.100 initially.

Hint 2Dilution factor is 100.

Hint 3New [H⁺] = 1.00 × 10⁻³.

Where students lose marks on this one
  • Dividing the pH by 100.

    Why it happens: Dilute the concentration, then find pH.

    Use c₁V₁ = c₂V₂.

Written for this site.

Exam question

Harder · about 6 min

3 marks

25.0 mL of 0.100 mol L HCl is mixed with 20.0 mL of 0.100 mol L NaOH. Calculate the pH of the mixture.

Hint 1n(H⁺) = 0.00250; n(OH⁻) = 0.00200.

Hint 2Excess H⁺ = 0.00050 mol.

Hint 3Total volume = 45.0 mL.

Where students lose marks on this one
  • Using 25.0 mL as the volume.

    Why it happens: The volumes add on mixing.

    Use 45.0 mL.

Written for this site.

Exam question

Harder · about 6 min

3 marks

20.0 mL of 0.100 mol L HCl is mixed with 30.0 mL of 0.100 mol L NaOH. Calculate the pH of the mixture at 25 °C.

Hint 1Which is in excess?

Hint 2Excess OH⁻ = 0.00100 mol in 50.0 mL.

Hint 3Find pOH, then pH.

Where students lose marks on this one
  • Calculating pH from [OH⁻] directly.

    Why it happens: −log[OH⁻] gives pOH.

    Subtract from 14.

Written for this site.

What lifts this to a Band 6

In a mixing question, set your working out in three labelled lines:

  1. the moles of each reagent;
  2. the excess, and its concentration in the total volume;
  3. the pH, going through pOH if the base is in excess.

Almost all the marks lost here come from using the wrong volume or from forgetting that a diprotic acid or Ba(OH)₂ doubles the moles.

pKa and the Henderson–Hasselbalch relation

Taking logs of the expression gives:

where . A stronger acid has a smaller .

When , the pH equals . This is the half-equivalence point of a weak acid titration, and the pH at which a buffer works best. Both appear in the next lesson.

The same relation explains why an indicator changes colour over a range of about .