HSC Study

Properties of Acids and Bases

Naming common inorganic acids and bases and their properties, preparing and using indicators, balanced equations for acids with bases, carbonates and metals, applications of neutralisation, measuring the enthalpy of neutralisation, and how models of acids and bases developed from Lavoisier to Brønsted–Lowry.

75 min · Module 6: Acid/Base Reactions

Assumes you have read Calculating the Equilibrium Constant (Keq).

The full teaching. Start here.

The short version

Names.

  • HCl is hydrochloric acid, H₂SO₄ is sulfuric acid, HNO₃ is nitric acid, and H₃PO₄ is phosphoric acid.
  • An "-ate" anion gives an "-ic" acid, and an "-ite" anion gives an "-ous" acid.
  • NaOH is sodium hydroxide, Ca(OH)₂ is calcium hydroxide, and NH₃ is ammonia.

Properties.

  • Acids taste sour and turn blue litmus red.
  • Bases taste bitter and turn red litmus blue.
  • Soluble acids and bases both conduct electricity.
  • Non-metal oxides are acidic. Metal oxides are basic, or amphoteric.

Reactions.

ReactionProductsTest
acid + basesalt + water
acid + carbonatesalt + water + CO₂limewater turns milky
acid + metalsalt + H₂a lit splint gives a squeaky pop

Enthalpy of neutralisation.

  • , using the total mass of the mixed solutions.
  • .
  • For a strong acid with a strong base, kJ mol.

The models, in order:

  1. Lavoisier: acids contain oxygen.
  2. Davy: acids contain hydrogen.
  3. Arrhenius: in water, acids give H⁺ and bases give OH⁻.
  4. Brønsted–Lowry: acids donate protons and bases accept them.

Names and properties

AcidNameBaseName
HClhydrochloric acidNaOHsodium hydroxide
H₂SO₄sulfuric acidKOHpotassium hydroxide
HNO₃nitric acidCa(OH)₂calcium hydroxide
H₃PO₄phosphoric acidNH₃ammonia
CH₃COOHethanoic acidNa₂CO₃sodium carbonate

Oxides show a pattern across the periodic table.

  • Non-metal oxides are acidic. For example, .
  • Metal oxides are basic. For example, .
  • Some are amphoteric. Al₂O₃ reacts with both acids and bases.

CheckpointAnswer before reading on.

What is the IUPAC name of ?

Select one answer

Hint 1PO₄³⁻ is phosphate.

Hint 2-ate anions give -ic acids.

Hint 3It is a triprotic acid.

CheckpointAnswer before reading on.

Which formula is paired with the correct name?

Select one answer

Hint 1Nitrate is NO₃⁻.

Hint 2Sulfate is SO₄²⁻.

Hint 3Calcium is 2+.

CheckpointAnswer before reading on.

Which oxide dissolves in water to form an acidic solution?

Select one answer

Hint 1Non-metal oxides are acidic.

Hint 2Metal oxides are basic or amphoteric.

Hint 3Which is a non-metal?

CheckpointAnswer before reading on.

Which property is shared by aqueous solutions of both acids and bases?

Select one answer

Hint 1Consider taste, litmus and conductivity.

Hint 2Both contain ions in solution.

Hint 3Which property depends on ions?

Indicators

Natural dyes such as the anthocyanins in red cabbage change colour with pH.

To make and use a red cabbage indicator:

  1. Boil chopped cabbage in water, then filter to get the extract.
  2. Calibrate it against solutions of known pH: it goes red–pink in acid, purple when neutral, and green–yellow in base.
  3. Use it to classify household substances.

Indicators are themselves weak acids: . HIn and In⁻ are different colours.

  • Adding acid shifts the equilibrium left.
  • Adding base shifts it right.

This is why the colour change can be reversed again and again.

IndicatorAcid colourBase colour
litmusredblue
phenolphthaleincolourlesspink
methyl orangeredyellow
bromothymol blueyellowblue

CheckpointAnswer before reading on.

A few drops of phenolphthalein are added to a sodium hydroxide solution, and then hydrochloric acid is added until in excess. What colour changes are seen?

Select one answer

Hint 1Phenolphthalein is colourless in acid.

Hint 2It is pink in base.

Hint 3Excess acid ends the change.

Exam question

Standard · about 5 min

3 marks

Describe how an indicator can be prepared from red cabbage and how it could be used to classify household substances as acidic, neutral or basic.

Hint 1The colour comes from anthocyanins.

Hint 2They must be extracted into a solvent.

Hint 3You need reference colours.

Where students lose marks on this one
  • Only mentioning boiling the cabbage.

    Why it happens: A reference scale is needed to interpret colours.

    Calibrate with known acids and bases.

Written for this site.

Exam question

Harder · about 5 min

3 marks

Indicators are weak acids, , where HIn and In⁻ have different colours. Explain why the colour changes reversibly when acid and then base are added.

Hint 1Adding acid increases [H⁺].

Hint 2Adding base removes H⁺.

Hint 3Le Chatelier.

Where students lose marks on this one
  • Saying the indicator reacts permanently.

    Why it happens: The change is an equilibrium shift.

    Use LCP both ways.

Written for this site.

Reactions of acids

Worked example3 marks

Writing the three types of acid reaction

Write balanced equations, with states, for dilute sulfuric acid reacting with (a) sodium hydroxide, (b) sodium carbonate and (c) zinc.

(a) Acid + base

H₂SO₄ is diprotic, so it needs 2 NaOH.

(b) Acid + carbonate

The products are salt, water and CO₂.

(c) Acid + metal

The products are salt and hydrogen.

Answer

The net ionic equations are:

  • (a)
  • (b)
  • (c)

CheckpointAnswer before reading on.

What is the balanced equation for the reaction of sulfuric acid with potassium hydroxide?

Select one answer

Hint 1Sulfuric acid is diprotic.

Hint 2It needs two KOH.

Hint 3Balance the water.

CheckpointAnswer before reading on.

What is the ionic equation for magnesium reacting with dilute hydrochloric acid?

Select one answer

Hint 1Metal + acid → salt + hydrogen.

Hint 2Chloride is a spectator.

Hint 3Balance the charges.

CheckpointAnswer before reading on.

What are the products when nitric acid reacts with sodium hydrogen carbonate?

Select one answer

Hint 1Hydrogen carbonates react like carbonates.

Hint 2The salt is a sodium salt of the nitrate ion.

Hint 3Three products.

Exam question

Standard · about 3 min

2 marks

Write a balanced equation, with states, for the reaction of hydrochloric acid with solid calcium carbonate, and describe a test for the gas produced.

Hint 1Acid + carbonate → salt + water + carbon dioxide.

Hint 2Calcium chloride is CaCl₂.

Hint 3The CO₂ test uses limewater.

Where students lose marks on this one
  • Leaving out the water.

    Why it happens: Carbonates give salt + water + CO₂.

    Three products.

Written for this site.

Exam question

Standard · about 5 min

3 marks

0.486 g of magnesium reacts with excess hydrochloric acid. Calculate the volume of hydrogen gas produced at 25 °C and 100 kPa, in litres. (Molar volume = 24.79 L mol; Mg = 24.31 g mol.)

Hint 1n(Mg) = m/M.

Hint 2Mg : H₂ = 1 : 1.

Hint 3V = n × 24.79.

Where students lose marks on this one
  • Using a 1 : 2 ratio from the HCl.

    Why it happens: The ratio Mg : H₂ is 1 : 1.

    Read it from the equation.

Written for this site.

Neutralisation in everyday life and industry

In the body and the home:

  • Antacids. Antacids such as Mg(OH)₂ or NaHCO₃ neutralise excess stomach HCl.
  • Toothpaste. It is mildly basic, so it neutralises the acids that attack tooth enamel.
  • Baking. Baking powder mixes an acid with NaHCO₃. The CO₂ it releases makes bread and cakes rise.

In industry and agriculture:

  • Soils.
    • Acidic soil is limed with CaCO₃ or Ca(OH)₂.
    • Alkaline soil is treated with sulfur or calcium sulfate.
  • Fertilisers. Ammonium sulfate and ammonium nitrate are made by neutralising ammonia with the matching acid.
  • Textiles. After fabric is scoured in hot NaOH, it is rinsed in ethanoic acid.
  • Mining. Acid mine drainage, which contains sulfuric acid from oxidised pyrite, is neutralised with CaO before the water is released.

Exam question

Standard · about 5 min

3 marks

An antacid tablet contains 0.50 g of magnesium hydroxide, (58.32 g mol). Calculate the number of moles of stomach HCl it can neutralise.

Hint 1.

Hint 2n(Mg(OH)₂) = 0.50/58.32.

Hint 3Double it.

Where students lose marks on this one
  • Forgetting the 1 : 2 ratio.

    Why it happens: Mg(OH)₂ has two hydroxides.

    Double the moles.

Written for this site.

Exam question

Standard · about 5 min

3 marks

Describe two applications of neutralisation in industry or agriculture, including a balanced equation for one.

Hint 1Think about soil and mine sites.

Hint 2What neutralises acidic soil?

Hint 3Lime or limestone.

Where students lose marks on this one
  • Describing an application without saying what is neutralised.

    Why it happens: Name the acid and the base.

    Be specific.

Written for this site.

Measuring the enthalpy of neutralisation

The enthalpy of neutralisation is the enthalpy change when an acid and a base react to form 1 mole of water.

To measure it:

  1. Mix known volumes of acid and base in an insulated polystyrene cup.
  2. Record the temperature every 30 seconds.
  3. Use to find the heat released.

Heat escapes while the temperature is still rising, so the peak you measure is too low. The fix is to extrapolate the cooling line back to the moment of mixing.

tT (°C)212325272468mixΔT
Temperature against time (in minutes). The cooling line (dashed) is extrapolated back to the moment of mixing. It meets 27.7 °C, giving ΔT = 6.7 °C, which is larger than the 27.2 °C peak you would read directly.

Worked example3 marks

Calculating ΔH of neutralisation

50.0 mL of 1.00 mol L HCl is mixed with 50.0 mL of 1.00 mol L NaOH. The graph gives ΔT = 6.7 °C. Calculate .

Heat released

The whole 100 g of solution is heated.

J.

Moles of water

The ratio is 1 : 1, and 0.0500 mol of each reactant is used.

mol.

Answer

kJ mol. The sign is negative because the reaction is exothermic.

Exam question

Standard · about 6 min

3 marks

50.0 mL of 1.00 mol L HCl and 50.0 mL of 1.00 mol L NaOH, both at 21.0 °C, are mixed in a polystyrene cup. The maximum temperature is 27.7 °C. Assuming the solution has density 1.00 g mL and J g K, calculate the magnitude of the molar enthalpy of neutralisation in kJ mol.

Hint 1The mass is the total 100 g.

Hint 2q = mcΔT with ΔT = 6.7.

Hint 3n(H₂O) = 0.0500 mol.

Where students lose marks on this one
  • Using only 50 g for the mass.

    Why it happens: Both solutions are heated.

    Use the total mass.

Written for this site.

Exam question

Harder · about 4 min

2 marks

The enthalpy of neutralisation of a strong acid with a strong base is kJ mol. Predict the temperature rise when 100 mL of 0.50 mol L is mixed with 100 mL of 1.0 mol L NaOH (total mass 200 g, J g K).

Hint 1H₂SO₄ is diprotic: n(H⁺) = 0.10 mol.

Hint 2n(H₂O) = 0.10 mol.

Hint 3ΔT = q/(mc).

Where students lose marks on this one
  • Using n(H₂SO₄) = 0.050 as the moles of water.

    Why it happens: Each H₂SO₄ gives two H⁺.

    Count moles of water formed.

Written for this site.

Exam question

Harder · about 5 min

3 marks

In the experiment to measure the enthalpy of neutralisation, the value obtained is usually smaller in magnitude than the accepted value. Identify the main cause and suggest two improvements.

Hint 1Where does some of the heat go?

Hint 2How can that be reduced?

Hint 3How can the true maximum be found?

Where students lose marks on this one
  • Blaming the thermometer’s precision.

    Why it happens: That is random, not systematic.

    Identify the one-directional error.

Written for this site.

CheckpointAnswer before reading on.

The enthalpy of neutralisation of ethanoic acid with NaOH is less exothermic than that of HCl with NaOH. Why?

Select one answer

Hint 1Ethanoic acid is weak.

Hint 2Most of it is un-ionised.

Hint 3Ionising absorbs some energy.

Common mistake

Using the mass of only one solution in q = mcΔT.

Why it happens: Only the volume of acid seems relevant to the moles.

The heat warms the whole mixture, so is the combined mass. In the worked example, that is 100 g, not 50 g. The moles of water, on the other hand, come from the limiting reagent.

How the models developed

  • Lavoisier (1776). Acids contain oxygen. Limitation: HCl contains no oxygen, and some oxygen compounds, such as MgO, are basic.
  • Davy (1810) and Liebig.
    • Davy proposed that acids contain hydrogen.
    • Liebig refined this: the hydrogen can be replaced by a metal.
    • Limitation: many hydrogen compounds, such as CH₄, are not acidic.
  • Arrhenius (1884).
    • In water, acids ionise to give H⁺ and bases dissociate to give OH⁻.
    • Neutralisation is .
    • Usefulness: it explains neutralisation, and why strong acids conduct well.
    • Limitations:
      • It only applies in aqueous solution.
      • It cannot explain bases with no OH⁻, such as NH₃ and Na₂CO₃.
      • It cannot explain why some salt solutions are acidic or basic.
      • It cannot explain gas-phase reactions such as .
  • Brønsted–Lowry (1923). An acid is a proton donor, and a base is a proton acceptor.
    • Usefulness:
      • It works in any solvent, or with no solvent at all.
      • Ions can be acids or bases, so it explains CO₃²⁻ as a base.
      • It introduces conjugate pairs and amphiprotic species such as water.
      • Arrhenius bases fit the model because the OH⁻ they release is a proton acceptor.
    • Limitations: it cannot explain acid–base behaviour with no proton transfer, such as , or acids with no hydrogen, such as BF₃.

Worked example2 marks

Classifying with two models

Classify each species in as a Brønsted–Lowry acid or base. Explain why Arrhenius struggled to call NH₃ a base.

Track the proton

The proton moves from H₂O to NH₃.

  • Forward reaction: H₂O is the acid and NH₃ is the base.
  • Reverse reaction: NH₄⁺ is the acid and OH⁻ is the base.

Answer

The conjugate pairs are NH₄⁺/NH₃ and H₂O/OH⁻.

NH₃ contains no OH group. Under Arrhenius, a base had to contain hydroxide that it could release. The OH⁻ here actually comes from water, which only the Brønsted–Lowry model can explain.

CheckpointAnswer before reading on.

According to Arrhenius, a base is a substance that:

Select one answer

Hint 1Arrhenius focused on ions in aqueous solution.

Hint 2Acids give H⁺.

Hint 3Bases give…?

CheckpointAnswer before reading on.

Why was Lavoisier’s theory that all acids contain oxygen abandoned?

Select one answer

Hint 1Test the theory against known acids.

Hint 2Which acid has no oxygen?

Hint 3Davy studied it.

CheckpointAnswer before reading on.

In , which species acts as a Brønsted–Lowry acid in the forward reaction?

Select one answer

Hint 1Which species loses a proton going left to right?

Hint 2H₂O becomes OH⁻.

Hint 3That is proton donation.

CheckpointAnswer before reading on.

Why is water described as amphiprotic?

Select one answer

Hint 1Water can gain a proton to form H₃O⁺.

Hint 2Water can lose a proton to form OH⁻.

Hint 3Both happen.

Exam question

Harder · about 7 min

4 marks

Ammonia gas and hydrogen chloride gas react to form white fumes: . Explain why the Arrhenius model cannot classify this as an acid–base reaction, and how the Brønsted–Lowry model does.

Hint 1Arrhenius requires aqueous solution and OH⁻.

Hint 2Is there water or OH⁻ here?

Hint 3BL: proton transfer.

Where students lose marks on this one
  • Saying NH₃ contains OH⁻.

    Why it happens: Only NH₃(aq) produces OH⁻ by reacting with water.

    Consider the gas-phase reaction.

Written for this site.

Exam question

Harder · about 4 min

2 marks

Explain one limitation of the Brønsted–Lowry model, using as an example.

Hint 1BL requires proton transfer.

Hint 2Is a proton transferred here?

Hint 3Yet CaO is basic and SO₃ is acidic.

Where students lose marks on this one
  • Saying CaO donates a proton.

    Why it happens: CaO contains no hydrogen.

    Look for protons.

Written for this site.

What lifts this to a Band 6

"Explain the limitations" questions need three things for each model:

  • the definition;
  • a specific substance or reaction it cannot explain;
  • why it fails.

For example, "Arrhenius cannot classify NH₃(g) + HCl(g) as neutralisation, because no water is present and neither reactant releases OH⁻." Then say which later model fixed the problem.

Beyond Brønsted–Lowry: Lewis acids

Lewis (1923) defined:

  • an acid as an electron-pair acceptor;
  • a base as an electron-pair donor.

An acid–base reaction then forms a coordinate bond.

This covers cases that Brønsted–Lowry cannot:

  • BF₃ accepts the lone pair of NH₃.
  • CaO reacts with SO₃: the O²⁻ ion donates a pair to the sulfur atom.
  • Metal ions such as Cu²⁺ bind water or ammonia.

Every Brønsted–Lowry base is also a Lewis base, because it must have a lone pair to accept a proton.

The model has a cost, though. It counts almost any coordinate-bond formation as acid–base behaviour, and it gives no simple measure of acid strength. That is why chemists still use and pH, which come from the Brønsted–Lowry model, for aqueous acids.