Calculating the Equilibrium Constant (Keq)
Writing equilibrium expressions, the rules for manipulating K, ICE-table calculations including the small-change assumption, using Q to predict the direction of reaction, how temperature changes K, finding K for iron(III) thiocyanate by colorimetry, and K applied to dissolution and to acids and bases.
75 min · Module 5: Equilibrium and Acid Reactions
Assumes you have read Factors that Affect Equilibrium.
The full teaching. Start here.
The short version
The expression. For :
- Put products over reactants, with each coefficient as a power.
- Leave out solids, pure liquids and water as the solvent.
Changing the equation changes K:
| Change to the equation | New K |
|---|---|
| Reverse it | |
| Double the coefficients | |
| Halve the coefficients | |
| Add two equations |
What the size of K tells you:
- : the equilibrium lies to the right, with products favoured.
- : the equilibrium lies to the left, with reactants favoured.
Q and K. Calculate with the same expression, but using the current concentrations.
- : the reaction goes forward.
- : the reaction goes in reverse.
- : the system is at equilibrium.
Temperature is the only thing that changes .
- For an exothermic reaction, heating lowers .
- For an endothermic reaction, heating raises .
Writing the expression
The law of mass action says that the rate of a reaction is proportional to the product of its reactant concentrations.
At equilibrium, the forward and reverse rates are equal, so . Rearranging gives , which is the ratio of products to reactants.
Because is a ratio of two rate constants, it depends only on temperature.
Pure solids and pure liquids have a concentration fixed by their density and molar mass. It does not change however much of the substance is present, so they are left out of the expression.
CheckpointAnswer before reading on.
What is the equilibrium expression for ?
Hint 1Products go on top, reactants underneath.
Hint 2Each concentration is raised to its coefficient.
Hint 3Coefficients become powers, not multipliers.
CheckpointAnswer before reading on.
What is the equilibrium expression for ?
Hint 1All species are aqueous, so all appear.
Hint 2Product over reactants.
Hint 3All coefficients are 1.
CheckpointAnswer before reading on.
What is the equilibrium expression for ?
Hint 1Which species are pure solids?
Hint 2The concentration of a pure solid is fixed.
Hint 3Fixed concentrations are left out of the expression.
CheckpointAnswer before reading on.
For an equilibrium, . What does this tell you?
Hint 1K is products over reactants.
Hint 2A very large K means the numerator dominates.
Hint 3Where does the position lie?
CheckpointAnswer before reading on.
For , at a certain temperature. Find for at the same temperature.
Hint 1Reversing the equation swaps the numerator and denominator.
Hint 2So the new K is the reciprocal.
Hint 31 ÷ 4.0.
CheckpointAnswer before reading on.
For , . Find for at the same temperature.
Hint 1The coefficients have been doubled.
Hint 2Every power in the expression doubles.
Hint 3So K is squared.
CheckpointAnswer before reading on.
Reaction 1 has equilibrium constant and reaction 2 has . What is the equilibrium constant of the overall reaction formed by adding reaction 1 and reaction 2?
Hint 1Write both expressions.
Hint 2Multiply them together.
Hint 3Intermediate species cancel.
Calculations
There are three types of calculation:
- K and all but one concentration are known. Substitute into the expression and solve.
- K is unknown and not every equilibrium concentration is given. Use an ICE table (Initial, Change, Equilibrium). The changes follow the mole ratio of the equation.
- K and only the initial concentrations are known. Let be the change. If is very small, assume is negligible compared with the initial concentrations.
End every calculation with a comparison of and .
Worked example4 marks
Using an ICE table to find K
mol of and mol of are placed in a 2.0 L vessel. At equilibrium, mol of is present. For , calculate .
Convert to concentrations
K uses mol L⁻¹, and the volume is 2.0 L.
Initially, , and . At equilibrium, .
ICE table
The changes follow the ratio 2 : 1 : 2.
| SO₂ | O₂ | SO₃ | |
|---|---|---|---|
| I | 0.20 | 0.10 | 0 |
| C | −0.15 | −0.075 | +0.15 |
| E | 0.050 | 0.025 | 0.15 |
Substitute
Use equilibrium values only.
.
Answer
. This is well above 1, so at this temperature the equilibrium lies to the right.
CheckpointAnswer before reading on.
At equilibrium in , mol L and mol L. Calculate .
Hint 1Write the expression first.
Hint 2.
Hint 3Square 0.020 before dividing.
CheckpointAnswer before reading on.
For , at a certain temperature. At equilibrium, mol L. Calculate in mol L.
Hint 1.
Hint 2So .
Hint 3Take the square root.
Exam question
Standard · about 5 min
3 marks
In a sealed vessel, is set up with initial mol L and no HI. At equilibrium, mol L. Calculate .
Hint 1Use an ICE table.
Hint 2HI rose by 0.300, so H₂ and I₂ each fell by 0.150.
Hint 3Equilibrium [H₂] = [I₂] = 0.050.
Where students lose marks on this one
Subtracting 0.300 from each reactant.
Why it happens: The mole ratio is 1 : 1 : 2.
Each reactant falls by half the rise in HI.
Written for this site.
Exam question
Harder · about 7 min
4 marks
mol of and mol of are placed in a 2.0 L vessel. At equilibrium, there are mol of . For , calculate .
Hint 1Convert to concentrations by dividing by 2.0 L.
Hint 2SO₃ rose by 0.15 mol/L, so SO₂ fell by 0.15 and O₂ by 0.075.
Hint 3Equilibrium: SO₂ 0.050, O₂ 0.025, SO₃ 0.15.
Where students lose marks on this one
Using moles instead of concentrations.
Why it happens: K uses mol/L; the volume is not 1 L here.
Divide every amount by 2.0 L first.
Written for this site.
Exam question
Harder · about 6 min
3 marks
For , . Initially mol L and there is no HI. Calculate the equilibrium in mol L.
Hint 1Let be the fall in [H₂]: equilibrium [HI] = .
Hint 2, a perfect square.
Hint 3Square root: .
Where students lose marks on this one
Giving x = 0.40 as [HI].
Why it happens: x is the change in [H₂]; [HI] = 2x.
Double x.
Written for this site.
Exam question
Harder · about 6 min
3 marks
For , . Initially mol L. Calculate the equilibrium . Give your answer as a multiple of mol L.
Hint 1K is tiny, so very little COCl₂ reacts.
Hint 2Assume .
Hint 3.
Where students lose marks on this one
Not taking the square root.
Why it happens: Both CO and Cl₂ equal $x$.
Solve x² = 1.0 × 10⁻⁹.
Written for this site.
Common mistake
Using the number of moles in the K expression.
Why it happens: The question gives moles, and it is easy to skip the conversion.
is defined in terms of concentrations. Divide every amount by the volume before building the ICE table. The shortcut only works when the volume is exactly 1 L.
Q and the direction of reaction
uses the same expression as , but with the concentrations at any moment, not only at equilibrium.
- : there is too little product, so the forward reaction is favoured.
- : there is too much product, so the reverse reaction is favoured.
Either way, the system moves until .
CheckpointAnswer before reading on.
For a reaction mixture, the reaction quotient is greater than . What happens?
Hint 1Q > K means too many products for equilibrium.
Hint 2The system must reduce the products.
Hint 3Which reaction does that?
Exam question
Standard · about 5 min
3 marks
For , at a certain temperature. A mixture has , and mol L. Determine whether the system is at equilibrium and, if not, which way it will proceed.
Hint 1Calculate Q with the same expression as K.
Hint 2.
Hint 3Compare Q with K.
Where students lose marks on this one
Stopping after calculating Q.
Why it happens: The final line must compare Q with K.
Always state the direction.
Written for this site.
Temperature and K
Concentration and pressure changes shift the position of equilibrium. The system then moves back to exactly the same value of .
Temperature is different, because it changes itself:
- For an exothermic forward reaction, heating shifts the position left, so falls.
- For an endothermic forward reaction, heating shifts the position right, so rises.
Your notes also link to the standard Gibbs free energy:
- A negative gives , so products are favoured.
- A positive gives , so reactants are favoured.
Worked example3 marks
Deciding the sign of ΔH from K at two temperatures
For , at 25 °C and at 100 °C. NO₂ is brown and N₂O₄ is colourless. Is the forward reaction exothermic or endothermic? Predict what is seen when a sealed tube of the mixture is moved from 25 °C to 100 °C.
Compare the values
A smaller K means less product at equilibrium.
falls from 220 to 2.8 as the temperature rises, so heating shifts the equilibrium to the left.
Link to ΔH
By Le Chatelier, heating favours the endothermic direction.
The reverse reaction is favoured by heating, so the reverse reaction is endothermic and the forward reaction is exothermic. This fits the bonds: forming the N–N bond releases energy.
Predict the observation
More NO₂ at the higher temperature.
At 100 °C the equilibrium lies further left, so the tube turns a darker brown. Returning it to 25 °C restores the paler colour, because returns to 220.
Answer
The forward reaction is exothermic, because decreases as temperature increases. On heating, the mixture darkens as N₂O₄ dissociates into brown NO₂. Only a temperature change alters ; a change in pressure or concentration would shift the position but leave at 220.
CheckpointAnswer before reading on.
For an exothermic forward reaction, what happens to when the temperature increases?
Hint 1Heating favours the endothermic reverse reaction.
Hint 2The position shifts left.
Hint 3Fewer products means a smaller K.
CheckpointAnswer before reading on.
Which change alters the value of the equilibrium constant for a gaseous equilibrium?
Hint 1Concentration and pressure changes shift the position.
Hint 2But the system then returns to the same ratio.
Hint 3What changes the ratio itself?
Exam question
Standard · about 4 min
2 marks
For a reaction, at 300 K and at 500 K. Deduce whether the forward reaction is exothermic or endothermic.
Hint 1K increases as T increases.
Hint 2So heating shifts the position right.
Hint 3Heating favours the endothermic direction.
Where students lose marks on this one
Saying exothermic because K is small.
Why it happens: The size of K tells you the position, not the sign of ΔH.
Look at how K changes with T.
Written for this site.
Exam question
Harder · about 4 min
2 marks
For a reaction at 298 K, kJ mol. Using with J K mol, calculate .
Hint 1Convert ΔG° to J mol⁻¹.
Hint 2.
Hint 3Then .
Where students lose marks on this one
Leaving ΔG° in kJ.
Why it happens: R is in J, so ΔG° must be in J.
Use 10 000 J mol⁻¹.
Written for this site.
Finding K by colorimetry
Of the species in the iron(III) thiocyanate equilibrium, only the blood-red absorbs strongly. So its concentration can be found from absorbance.
- Make the standards. Mix a small, known amount of with a large excess of . The excess pushes the equilibrium almost completely to the right, so equals the you added.
- Draw the calibration curve. Zero the colorimeter with distilled water. Measure the absorbance of each standard and plot absorbance against concentration.
- Measure the equilibrium mixtures. Mix comparable amounts of and , and read the equilibrium from the curve.
- Calculate K. Use an ICE table to find the other equilibrium concentrations, then substitute into the expression.
Worked example3 marks
K from the colorimetry data
The mixture measured in the figure started with and mol L. Calculate .
From the curve
A = 0.45.
At equilibrium, .
ICE
The ratio is 1 : 1 : 1.
and .
Substitute
Use equilibrium concentrations.
.
Answer
. Repeat with several mixtures at the same temperature: the values of should agree.
CheckpointAnswer before reading on.
A calibration curve for is a straight line through the origin with . An equilibrium mixture has an absorbance of . Find as a multiple of mol L.
Hint 1Rearrange for the concentration.
Hint 2.
Hint 3.
Exam question
Harder · about 6 min
3 marks
In an equilibrium mixture, the initial concentrations were and mol L. Colorimetry shows the equilibrium mol L. Calculate .
Hint 1Both reactants fall by 2.50 × 10⁻⁴.
Hint 2Equilibrium: , .
Hint 3Substitute into the expression.
Where students lose marks on this one
Using the initial concentrations in K.
Why it happens: K needs equilibrium concentrations.
Subtract what reacted first.
Written for this site.
Exam question
Harder · about 7 min
4 marks
Outline how colorimetry can be used to determine for .
Hint 1Only FeSCN²⁺ absorbs strongly.
Hint 2A calibration curve links absorbance to concentration.
Hint 3Then use an ICE table.
Where students lose marks on this one
Assuming the equilibrium mixture has [FeSCN²⁺] equal to the initial [SCN⁻].
Why it happens: Only the standards use excess Fe³⁺ to force completion.
The equilibrium mixture needs the calibration curve.
Written for this site.
K for other kinds of reaction
The same idea gives the constants you will use for the rest of the course.
- Dissolving an ionic solid. For , the solubility product is . The solid is left out.
- A weak acid. For , the acid dissociation constant is . Water is the solvent, so it is left out. A larger means a stronger acid.
- A weak base. For , the base dissociation constant is .
- A conjugate pair. For an acid and its conjugate base, .
CheckpointAnswer before reading on.
What is the equilibrium expression for the dissolution ?
Hint 1The solid is left out.
Hint 2Iodide has a coefficient of 2.
Hint 3This constant is called the solubility product.
CheckpointAnswer before reading on.
Acid X has and acid Y has . Which statement is correct?
Hint 1A larger Ka means more dissociation.
Hint 2More dissociation means a stronger acid.
Hint 3Compare the powers of ten first.
Exam question
Harder · about 5 min
3 marks
A 0.100 mol L solution of a weak acid HA has mol L at equilibrium. Calculate for . Give your answer as a multiple of .
Hint 1.
Hint 2.
Hint 3Water is the solvent, so it is left out.
Where students lose marks on this one
Including [H₂O] in the expression.
Why it happens: Water is the solvent, with a constant concentration.
Leave water out.
Written for this site.
What lifts this to a Band 6
In any calculation, markers look for:
- the expression written out before any numbers go in;
- an ICE table whose changes follow the mole ratio;
- concentrations in mol L, not moles;
- a final line comparing with , or interpreting the size of .
If you use the small-change assumption, justify it. is very small, and turns out to be less than 5% of the initial concentration.
Why ln K is linear in 1/T
Combining with gives:
So a graph of against is a straight line, with gradient .
- For an exothermic reaction, the gradient is positive. As rises, falls, so falls. This is the qualitative rule, made quantitative.
- Measuring at several temperatures lets you find both and from one straight-line graph.