Solution Equilibria
How ionic compounds dissolve, solubility curves, how Aboriginal and Torres Strait Islander Peoples used solubility equilibria to remove toxins from cycads, solubility rules and precipitation reactions, Ksp and molar solubility, predicting precipitates with Q, and the common ion effect.
75 min · Module 5: Equilibrium and Acid Reactions
Assumes you have read Calculating the Equilibrium Constant (Keq).
The full teaching. Start here.
The short version
Dissolving.
- Water's δ− oxygen ends surround the cations, and its δ+ hydrogen ends surround the anions. These are ion–dipole attractions.
- Breaking the lattice absorbs energy. Forming ion–dipole attractions releases energy.
Temperature.
- Most solids become more soluble as the temperature rises.
- Gases become less soluble.
Cycads. Leaching in running water keeps removing the dissolved toxin. The equilibrium never settles, so the toxin keeps dissolving.
Solubility rules.
- Soluble: all nitrates and all Group 1 and ammonium salts.
- Insoluble:
- AgCl, AgI and PbI₂;
- BaSO₄ and PbSO₄;
- most carbonates and hydroxides.
Ksp. For :
- .
- For a 1 : 1 salt, .
Precipitates.
- If , a precipitate forms.
- If , none forms.
- Always use the concentrations after mixing.
Common ion. Adding an ion that is already in the equilibrium shifts it left, so the salt becomes less soluble.
How ionic compounds dissolve
Water is polar and hydrogen-bonded.
When an ionic crystal is placed in water, water molecules cluster around the ions at the surface:
- the δ− oxygen ends face the cations;
- the δ+ hydrogen ends face the anions.
These ion–dipole attractions pull the ions out of the lattice one by one. Each dissolved ion is then surrounded by a shell of water molecules.
The energy has two parts:
- absorbed: energy is needed to break the lattice and to separate some water molecules;
- released: energy is given out as the ion–dipole attractions form.
The balance between these decides how much dissolves. It also decides whether the solution warms up or cools down.
Some salts keep water in the crystal as water of crystallisation. Blue loses this water when heated, leaving white anhydrous .
Worked example3 marks
Dissolving sodium chloride and ammonium nitrate
Describe the processes that occur when solid sodium chloride dissolves in water, and explain why dissolving ammonium nitrate makes the water noticeably colder.
Attraction to the surface ions
Water is polar.
Water molecules orient around the ions at the edge of the crystal: the δ− oxygen faces Na⁺ and the δ+ hydrogens face Cl⁻. These ion–dipole attractions pull ions out of the lattice.
Hydration
Each ion ends up surrounded by water.
The separated ions are hydrated, each with a shell of water molecules:
Energy balance
Bonds broken absorb energy; attractions formed release it.
Energy is absorbed to break the ionic lattice and some hydrogen bonds between water molecules. Energy is released as ion–dipole attractions form. For NaCl the two nearly balance, so the temperature barely changes. For NH₄NO₃ more energy is absorbed than released, so the process is endothermic and draws heat from the water. It still happens because the ions spreading through the solution greatly increases disorder (entropy).
Answer
Ion–dipole attractions pull ions from the lattice, and the ions are hydrated. The temperature change depends on the balance between energy absorbed (breaking the lattice and hydrogen bonds) and energy released (forming ion–dipole attractions). For ammonium nitrate the energy absorbed is greater, so the solution cools.
CheckpointAnswer before reading on.
When sodium chloride dissolves in water, how are the water molecules arranged around the ions?
Hint 1Water is polar: O is δ−, H is δ+.
Hint 2Opposite charges attract.
Hint 3Which end faces the Na⁺?
CheckpointAnswer before reading on.
Blue turns white when heated strongly. What has happened?
Hint 1The formula includes water of crystallisation.
Hint 2Heating can drive off this water.
Hint 3What is a salt without it called?
Exam question
Standard · about 5 min
3 marks
Describe the energy changes that occur when an ionic compound dissolves in water, and state what determines whether it dissolves to a large extent.
Hint 1Which attractions must be broken?
Hint 2Which new attractions form?
Hint 3Compare the two.
Where students lose marks on this one
Saying bond breaking releases energy.
Why it happens: Breaking bonds always absorbs energy.
Breaking absorbs, forming releases.
Written for this site.
Solubility curves
A solubility curve shows the maximum mass that dissolves in 100 g of water at each temperature.
- Solids: most become more soluble on heating.
- Gases: the opposite. Faster gas molecules escape from solution more easily.
Cooling a saturated solution makes the excess solute crystallise out. This is how solids are purified by recrystallisation.
CheckpointAnswer before reading on.
The solubility of salt X is 110 g per 100 g of water at 60 °C and 32 g per 100 g of water at 20 °C. A saturated solution of X in 100 g of water at 60 °C is cooled to 20 °C. What mass of crystals forms, in grams?
Hint 1At 20 °C only 32 g can stay dissolved.
Hint 2The rest crystallises.
Hint 3110 − 32.
CheckpointAnswer before reading on.
Why do fish in a warm river have less dissolved oxygen available than in a cold river?
Hint 1How does the solubility of a gas change with temperature?
Hint 2Gas particles gain kinetic energy.
Hint 3They escape the solution more easily.
Cycads and solubility equilibria
Cycad seeds are a rich source of starch, but they contain toxins such as cycasin, which is both toxic and carcinogenic. Aboriginal and Torres Strait Islander Peoples developed methods to make them safe:
- Preparation: the seeds are cooked, then pounded, sliced or ground into a meal.
- Leaching: the prepared seed is left in woven bags in running water for days.
- Fermentation: in some regions, the seeds are soaked and buried instead, so microorganisms break down the toxin.
Leaching is a solubility equilibrium in action. In a still bowl, cycasin dissolves only until the water is saturated. After that, dissolving and crystallising happen at equal rates, and no more toxin is removed.
In a creek, the system is open. The dissolved cycasin is carried away continuously, so stays low. The equilibrium keeps shifting right to replace it, and the toxin keeps dissolving until almost none is left.
CheckpointAnswer before reading on.
Some Aboriginal and Torres Strait Islander Peoples placed crushed cycad seeds in woven bags in running creek water for several days before eating them. What does this process rely on?
Hint 1What does water do to the toxin?
Hint 2The toxin cycasin is water soluble.
Hint 3The name of the process is from the notes.
Exam question
Harder · about 5 min
3 marks
Using the equilibrium , explain why leaching cycad seeds in running water removes much more toxin than soaking them in a still bowl of water.
Hint 1In still water, a saturated solution forms.
Hint 2At saturation, the rates of dissolving and crystallising are equal.
Hint 3Running water keeps removing cycasin(aq).
Where students lose marks on this one
Saying running water dissolves it faster because it is moving.
Why it happens: The key is that equilibrium is never reached.
Link removal of product to the shift.
Written for this site.
Solubility rules and precipitation
When two ionic solutions are mixed, check each new cation–anion pairing against the solubility rules. If a pairing is insoluble, it precipitates. The other ions stay in solution as spectators.
| Mixture | Precipitate | Net ionic equation |
|---|---|---|
| KCl + AgNO₃ | white AgCl | |
| KI + Pb(NO₃)₂ | bright yellow PbI₂ | |
| Na₂SO₄ + Ba(NO₃)₂ | white BaSO₄ |
To find the rules by investigation:
- Use nitrate solutions to supply the cations, and sodium or potassium solutions to supply the anions. All of these are soluble, so any precipitate must come from the pair you are testing.
- Mix each cation with each anion in a grid on a spotting tile.
- Record whether a precipitate forms, and its colour.
Worked example4 marks
What is left after mixing two solutions
50.0 mL of 0.100 mol L KI is mixed with 50.0 mL of 0.100 mol L Pb(NO₃)₂. Predict the precipitate, write the net ionic equation, calculate its mass, and give the concentration of each ion left in the 100.0 mL of solution.
Find the new pairings
Check each new cation–anion pair against the solubility rules.
The new pairs are K⁺ with NO₃⁻ (all nitrates are soluble) and Pb²⁺ with I⁻ (insoluble). So yellow PbI₂ precipitates:
Limiting ion
Compare moles with the 1 : 2 ratio.
mol and mol. The iodide needs only mol of Pb²⁺, so I⁻ is limiting and mol of Pb²⁺ is left over.
Mass of precipitate
M(PbI₂) = 207.2 + 2 × 126.9 = 461.0 g mol⁻¹.
mol, so g.
Ions left in solution
Divide the remaining moles by the total volume, 0.1000 L.
- mol L
- mol L
- mol L
- is very small, since almost all of it has precipitated.
Check the charges: , which balances the nitrate.
Answer
1.15 g of yellow PbI₂ forms. The solution contains 0.0250 mol L Pb²⁺, 0.0500 mol L K⁺ and 0.100 mol L NO₃⁻, with K⁺ and NO₃⁻ as spectator ions.
CheckpointAnswer before reading on.
Potassium chloride solution is mixed with silver nitrate solution. What is observed and why?
Hint 1Nitrates and potassium salts are soluble.
Hint 2Chlorides are soluble except Ag⁺ (and Pb²⁺ slightly).
Hint 3Silver chloride is white.
CheckpointAnswer before reading on.
Potassium iodide solution is added to lead(II) nitrate solution. What is observed?
Hint 1Lead(II) iodide is insoluble.
Hint 2It has a distinctive colour.
Hint 3Potassium nitrate stays dissolved.
CheckpointAnswer before reading on.
Sodium sulfate solution is mixed with barium nitrate solution. What is the net ionic equation?
Hint 1Identify the precipitate.
Hint 2Leave out spectator ions.
Hint 3Include states.
CheckpointAnswer before reading on.
Which pair of solutions forms no precipitate when mixed?
Hint 1Check each possible new cation–anion pair.
Hint 2Group 1 and nitrate salts are soluble.
Hint 3Hydroxides, carbonates and sulfates have insoluble members.
CheckpointAnswer before reading on.
An unknown colourless solution gives a white precipitate with sodium sulfate, and no precipitate with sodium chloride. Which cation could be present?
Hint 1Which cations give insoluble sulfates?
Hint 2Which of those give insoluble chlorides?
Hint 3Eliminate those.
Exam question
Harder · about 7 min
4 marks
Outline a method to determine solubility rules for the combinations of the cations Ag⁺, Pb²⁺ and Ba²⁺ with the anions Cl⁻, I⁻ and SO₄²⁻, including how validity would be ensured.
Hint 1Use nitrate solutions of the cations and sodium or potassium solutions of the anions.
Hint 2Why those salts?
Hint 3Mix in a grid, and observe.
Where students lose marks on this one
Using a chloride salt as the source of Ag⁺.
Why it happens: The source compound must itself be soluble.
Use nitrates for the cations.
Written for this site.
Ksp and solubility
A saturated solution of a sparingly soluble salt is in dynamic equilibrium with the undissolved solid. The equilibrium constant for this is the solubility product, . The solid is left out of the expression.
Your notes set out two types of question:
- Solubility given, find :
- Convert the solubility to mol L.
- Write each ion's concentration from the mole ratio.
- Substitute into the expression.
- given, find the solubility:
- Let the molar solubility be .
- Write each ion's concentration in terms of .
- Solve for , then convert to g L if the question asks.
Worked example3 marks
Solubility from Ksp
at 25 °C. Calculate the solubility of in mol L and in g L. The molar mass is 461.0 g mol.
Equation and ions
One Pb²⁺ and two I⁻ per formula unit.
, so and .
Expression
Coefficients are powers.
.
Solve
Take the cube root.
mol L. Multiplying by the molar mass gives g L.
Answer
The solubility is mol L, which is g L.
CheckpointAnswer before reading on.
What is the expression for silver carbonate, ?
Hint 1Write the dissolution equation first.
Hint 2.
Hint 3The solid is left out.
Exam question
Standard · about 3 min
2 marks
at 25 °C. Calculate the molar solubility of AgCl in pure water, as a multiple of mol L.
Hint 1Let the solubility be : .
Hint 2.
Hint 3Square root.
Where students lose marks on this one
Forgetting to take the square root.
Why it happens: Ksp is s², not s.
Solve for s.
Written for this site.
Exam question
Harder · about 5 min
3 marks
at 25 °C. Calculate the molar solubility of in pure water, as a multiple of mol L.
Hint 1 and .
Hint 2.
Hint 3.
Where students lose marks on this one
Writing Ksp = s × 2s or s(s)² .
Why it happens: [I⁻] is 2s, and it is squared.
Ksp = 4s³.
Written for this site.
Exam question
Harder · about 6 min
3 marks
The solubility of magnesium hydroxide, (molar mass 58.32 g mol), is g L at 25 °C. Calculate , as a multiple of .
Hint 1Convert g/L to mol/L.
Hint 2 and .
Hint 3.
Where students lose marks on this one
Using the solubility in g/L directly.
Why it happens: Ksp uses mol/L.
Divide by the molar mass first.
Written for this site.
Exam question
Standard · about 4 min
2 marks
at 25 °C, and its molar mass is 233.4 g mol. Calculate its solubility in g L, as a multiple of .
Hint 1.
Hint 2Multiply by the molar mass.
Hint 3Check your power of ten.
Where students lose marks on this one
Giving the answer in mol/L.
Why it happens: The question asks for g/L.
Multiply by M.
Written for this site.
Common mistake
A smaller Ksp always means a less soluble salt.
Why it happens: This works when the salts being compared have the same ion ratio.
You can compare values directly only for salts of the same formula type, such as AgCl and AgBr. has a smaller than AgCl, but it is about five times more soluble, because for that salt. When in doubt, calculate for each salt.
CheckpointAnswer before reading on.
At 25 °C, and . Which statement is correct?
Hint 1The two salts have different ion ratios.
Hint 2AgCl: . : .
Hint 3Calculate both.
Predicting precipitates
To predict whether a precipitate forms:
- Find the concentration of each ion after mixing. Mixing equal volumes halves every concentration.
- Calculate the ionic product .
- Compare with :
- : the solution is supersaturated, so the solid precipitates until .
- : no precipitate forms.
Worked example3 marks
Will a precipitate form?
Equal volumes of mol L and mol L NaCl are mixed. . Will a precipitate form?
Concentrations after mixing
The volume doubles.
mol L.
Ionic product
Q uses the same expression as Ksp.
.
Answer
, so AgCl precipitates. Even very dilute silver and chloride solutions give a precipitate, because is so small.
CheckpointAnswer before reading on.
Equal volumes of mol L and mol L NaCl are mixed. . What happens?
Hint 1After mixing, each ion is 1.0 × 10⁻⁴.
Hint 2.
Hint 3Compare with Ksp.
Exam question
Harder · about 5 min
3 marks
50.0 mL of mol L is mixed with 50.0 mL of mol L KI. Given , predict whether a precipitate forms.
Hint 1Mixing equal volumes halves each concentration.
Hint 2.
Hint 3Compare Q with Ksp.
Where students lose marks on this one
Using the concentrations before mixing.
Why it happens: The total volume doubles.
Halve each concentration.
Written for this site.
The common ion effect
Adding an ion that already takes part in the equilibrium increases its concentration. By Le Chatelier's principle, the equilibrium shifts left, so less of the salt dissolves. itself does not change.
For example, AgCl is thousands of times less soluble in 0.10 mol L NaCl than in pure water.
CheckpointAnswer before reading on.
Why is silver chloride less soluble in sodium chloride solution than in pure water?
Hint 1NaCl supplies extra Cl⁻.
Hint 2Cl⁻ is a product of the dissolution.
Hint 3Le Chatelier.
Exam question
Harder · about 5 min
3 marks
Calculate the molar solubility of AgCl in 0.10 mol L NaCl, given . Give your answer as a multiple of mol L.
Hint 1.
Hint 2.
Hint 3.
Where students lose marks on this one
Using s² = Ksp as in pure water.
Why it happens: The chloride mostly comes from NaCl.
Use [Cl⁻] = 0.10.
Written for this site.
What lifts this to a Band 6
In a question, write the dissolution equation before anything else. The coefficients give you the ion concentrations in terms of , and the powers in the expression.
In a precipitate question, examiners check for:
- the dilution step;
- calculated with the correct powers;
- an explicit comparison of with , followed by a conclusion.
Try the calculation above with the graph below. Choose a salt, set the two solutions, and see whether the mixture lands above the line Q = Ksp.
- Q > Ksp: precipitate
- Q = Ksp(PbI₂)
- Salt
- PbI₂, Ksp = 9.80 × 10⁻⁹
- After mixing
- [Pb²⁺] = 5.00 × 10⁻³, [I⁻] = 5.00 × 10⁻⁴ mol L⁻¹
- Q = [Pb²⁺][I⁻]²
- 1.25 × 10⁻⁹
- Result
- Q ≤ Ksp: no precipitate
Every slider is a normal range input, so the arrow keys move it one step and Home and End jump to the extremes.
Selective precipitation
Because values can differ by many powers of ten, you can separate ions by adding a precipitating agent slowly.
Take a solution containing both and , and add drop by drop. AgI, which has the far smaller , reaches first and precipitates. AgCl only starts to form once almost all the iodide has gone.
The same idea underlies the gravimetric and precipitation titration methods in Module 8. It also explains how the order of reagents in a qualitative analysis scheme is chosen.