HSC Study

Analysis of Organic Substances

Chemical tests for C=C, hydroxyl groups and carboxylic acids, then how mass spectrometry, infrared spectroscopy and proton and carbon-13 NMR are combined to determine the structure of an organic compound.

110 min · Module 8: Applying Chemical Ideas

Assumes you have read Reactions of Organic Acids and Bases.

The full teaching. Start here.

The short version

Chemical tests:

  • C=C: bromine water turns from orange-brown to colourless quickly, in the dark.
  • Carboxylic acid: Na₂CO₃ fizzes, and the CO₂ turns limewater milky. The acid also turns blue litmus red.
  • Hydroxyl (alcohol): a dried sample fizzes with sodium, giving H₂ (a squeaky pop). Warming with a carboxylic acid and concentrated H₂SO₄ gives a fruity ester smell. Acidified dichromate or permanganate is decolourised or changes colour with primary and secondary alcohols.

What each instrument tells you:

TechniqueMain information
mass spectrometrymolar mass (molecular ion M⁺) and fragments
infraredwhich bonds and functional groups are present
¹³C NMRnumber and type of carbon environments
¹H NMRnumber of H environments, how many H in each (area), neighbouring H (splitting), what they are near (shift)

Chemical tests for functional groups

Carbon–carbon double bonds. Shake the sample with bromine water in the dark. Alkenes decolourise it rapidly because Br₂ adds across the C=C:

Alkanes only react in UV light, slowly, by substitution. Acidified KMnO₄ (purple to colourless) also detects C=C, but it oxidises primary and secondary alcohols too, so it is less specific.

Carboxylic acids. Add Na₂CO₃ or NaHCO₃ solution. Bubbles of CO₂ form, which turn limewater milky:

Alcohols are neutral, so they do not react.

Hydroxyl groups. Test for acid first, because carboxylic acids also contain –OH.

  1. Sodium metal. Dry the sample with anhydrous CaCl₂ or MgSO₄ (water reacts with sodium too). A small piece of sodium fizzes, and the gas gives a squeaky pop: .
  2. Esterification. Warm with ethanoic acid and a few drops of concentrated H₂SO₄, then pour into water. A fruity smell shows an ester formed.
  3. Oxidation. Acidified K₂Cr₂O₇ turns from orange to green (or KMnO₄ from purple to colourless) with primary and secondary alcohols. Tertiary alcohols do not react.

CheckpointAnswer before reading on.

Which observation shows that a liquid contains a C=C double bond?

Select one answer

Hint 1Addition reaction.

Hint 2Bromine water is orange-brown.

Hint 3Fast, in the dark.

CheckpointAnswer before reading on.

Which test distinguishes a carboxylic acid from an alcohol?

Select one answer

Hint 1Acids react with carbonates.

Hint 2Gas is CO₂.

Hint 3Alcohols are neutral.

CheckpointAnswer before reading on.

A compound decolourises acidified KMnO₄ but not bromine water. Which is it most likely to be?

Select one answer

Hint 1Both oxidise alkenes and 1°/2° alcohols.

Hint 2Bromine water only detects C=C.

Hint 3Combine.

Exam question

Harder · about 5 min

3 marks

Describe two chemical tests that show the presence of a hydroxyl group in an alcohol, and explain why a test for carboxylic acid should be done first.

Hint 1Sodium metal: H₂.

Hint 2Esterification: fruity smell.

Hint 3Acids also react with Na and give esters.

Where students lose marks on this one
  • Using the sodium test on a wet sample.

    Why it happens: Water also reacts with sodium.

    Dry the sample first.

Written for this site.

Exam question

Hardest asked · about 7 min

4 marks

Three unlabelled liquids are hex-1-ene, hexan-1-ol and hexanoic acid. Describe a sequence of chemical tests to identify each.

Hint 1Start with the most specific test.

Hint 2Carbonate for the acid.

Hint 3Bromine water for the alkene.

Where students lose marks on this one
  • Using KMnO₄ to find the alkene.

    Why it happens: It also oxidises the alcohol.

    Use bromine water.

Written for this site.

Common mistake

Use acidified KMnO₄ to show a compound is an alkene.

Why it happens: It is not specific to C=C.

Permanganate also oxidises primary and secondary alcohols and aldehydes. Bromine water in the dark is the test for C=C.

Mass spectrometry

  1. Ionisation. The vaporised sample is hit by high-energy electrons, which knock one electron off each molecule. This forms the molecular ion, M⁺.
  2. Fragmentation. Many molecular ions break apart into a smaller positive ion and a neutral radical.
  3. Acceleration and deflection. Positive ions are accelerated by an electric field, then deflected by a magnetic field. Lighter ions and ions with more charge are deflected more, so ions are separated by mass-to-charge ratio, m/z.
  4. Detection. The detector records the abundance of each m/z. Neutral radicals are not deflected and are not detected.

Reading the spectrum:

  • The molecular ion peak is the peak with the highest m/z (apart from small isotope peaks). It gives the molar mass.
  • The base peak is the tallest peak, set to 100%. It is the most abundant, usually most stable, ion.
  • The fragments reveal parts of the molecule. Subtract to find what was lost.
m/zLikely fragment
15CH₃⁺
29C₂H₅⁺ or CHO⁺
31CH₂OH⁺
43C₃H₇⁺ or CH₃CO⁺
45COOH⁺
57C₄H₉⁺

Isotopes. Chlorine is about 75% ³⁵Cl and 25% ³⁷Cl, so a compound with one Cl gives peaks at M and M + 2 in a 3 : 1 ratio. Bromine (⁷⁹Br and ⁸¹Br) gives M and M + 2 at about 1 : 1. A small M + 1 peak comes from ¹³C.

CheckpointAnswer before reading on.

In a mass spectrum, what does the peak with the highest m/z (ignoring small isotope peaks) usually give?

Select one answer

Hint 1Whole molecule minus one electron.

Hint 2Molecular ion.

Hint 3Molar mass.

CheckpointAnswer before reading on.

What is the base peak in a mass spectrum?

Select one answer

Hint 1Relative abundance 100%.

Hint 2Tallest peak.

Hint 3Most stable fragment.

CheckpointAnswer before reading on.

The mass spectrum of propanal (M = 58) has a large peak at m/z = 29. Which ion causes it?

Select one answer

Hint 158 − 29 = 29.

Hint 2CHO⁺ and C₂H₅⁺ are both 29.

Hint 3Either fragment of the C–C bond next to C=O.

CheckpointAnswer before reading on.

The mass spectrum of ethanol has peaks at 46, 45 and 31. What does the peak at 31 correspond to?

Select one answer

Hint 146 − 31 = 15.

Hint 2Loss of CH₃.

Hint 3Fragment with O.

CheckpointAnswer before reading on.

A mass spectrum shows two molecular ion peaks at m/z 78 and 80 in a 3 : 1 ratio. Which compound is it?

Select one answer

Hint 1Chlorine: ³⁵Cl and ³⁷Cl in 3 : 1.

Hint 2Bromine is about 1 : 1.

Hint 3M = 78 with ³⁵Cl.

Exam question

Harder · about 5 min

3 marks

Outline how a mass spectrometer produces a mass spectrum.

Hint 1Ionisation by electron bombardment.

Hint 2Acceleration and deflection.

Hint 3Detection by m/z.

Where students lose marks on this one
  • Saying all fragments are detected.

    Why it happens: Neutral radicals are not deflected.

    Only positive ions.

Written for this site.

Infrared spectroscopy

Covalent bonds vibrate: they stretch and bend. Each bond vibrates at a particular frequency that depends on the bond strength and the masses of the atoms. Stronger bonds (such as C=O) vibrate faster, so they absorb at higher wavenumbers. Bonds to heavier atoms absorb at lower wavenumbers.

When infrared radiation of that frequency passes through the sample, the bond absorbs it and vibrates more strongly. A vibration only absorbs IR if it changes the dipole moment of the molecule. The spectrum plots transmittance against wavenumber (cm⁻¹), so absorptions appear as downward troughs.

BondWavenumber (cm⁻¹)Appearance
O–H (alcohol)3230–3550broad
O–H (carboxylic acid)2500–3000very broad
N–H (amine, amide)3300–3500medium
C–H2850–3300sharp
C=O1680–1750strong, sharp
C=C1620–1680medium
C–O1000–1300strong

The region below about 1500 cm⁻¹ is the fingerprint region. It holds many overlapping bands that are unique to each compound. Matching it to a database spectrum confirms identity, and extra bands show impurities.

CheckpointAnswer before reading on.

An IR spectrum shows a very broad band at 2500–3000 cm⁻¹ and a strong sharp band at 1710 cm⁻¹. Which functional group is present?

Select one answer

Hint 1Broad O–H lower than in alcohols.

Hint 2C=O at 1710.

Hint 3Both together.

CheckpointAnswer before reading on.

How could IR spectroscopy distinguish propan-2-ol from propanone?

Select one answer

Hint 1Alcohol: O–H band.

Hint 2Ketone: C=O band.

Hint 3Compare.

Exam question

Harder · about 5 min

3 marks

Explain how an IR spectrum is produced and what the fingerprint region is used for.

Hint 1Bonds vibrate.

Hint 2Specific frequencies absorbed.

Hint 3Below 1500 cm⁻¹.

Where students lose marks on this one
  • Saying IR breaks bonds.

    Why it happens: IR energy only increases vibration.

    Vibrational excitation.

Written for this site.

Common mistake

The band near 2900 cm⁻¹ shows the compound is an alkane.

Why it happens: Almost every organic molecule has C–H bonds.

Use the bands that are characteristic of functional groups: O–H, N–H, C=O and C=C. A C–H band tells you very little on its own.

NMR spectroscopy

Nuclei such as ¹H and ¹³C behave like tiny magnets. In a strong magnetic field they line up with or against the field. Radio waves of the right frequency flip them into the higher-energy state, and this resonance is detected.

Shielding. Electrons around a nucleus shield it from the external field. An electronegative atom nearby (O, N, a halogen) or a C=O group pulls electron density away. The nucleus is deshielded, feels a stronger field, and resonates at a higher chemical shift, δ (ppm).

Reference and solvent. Shifts are measured from tetramethylsilane (TMS), Si(CH₃)₄, set at 0 ppm. Its 12 hydrogens are equivalent and highly shielded, so it gives one sharp peak away from almost everything else, and it is inert and volatile. Samples are dissolved in deuterated solvents such as CDCl₃. Deuterium resonates at a completely different frequency from ¹H, so the solvent does not add peaks.

Typical ¹H shifts:

Hydrogen environmentδ (ppm)
R–CH₃0.9–1.0
CH next to C=O2.0–2.7
R–OH1–6 (variable)
CH bonded to O (alcohol, ester)3.3–4.3
aldehyde CHO9–10
carboxylic acid COOH10–13

Proton (¹H) NMR

A ¹H spectrum gives four pieces of information:

  1. Number of peaks: the number of different hydrogen environments. Use symmetry: equivalent H give one signal.
  2. Chemical shift: what each hydrogen is near.
  3. Relative area (integration): the ratio of hydrogens in each environment.
  4. Splitting (high resolution): a signal is split by the H on adjacent carbons. With n neighbouring H, it splits into n + 1 peaks. The intensities follow Pascal's triangle: doublet 1 : 1, triplet 1 : 2 : 1, quartet 1 : 3 : 3 : 1.

Hydrogens on the same carbon do not split each other. The OH hydrogen exchanges rapidly between molecules, so it usually appears as a singlet and does not split its neighbours.

CH₂ quartetarea 2OH singletarea 1CH₃ tripletarea 3TMS012345chemical shift δ (ppm)
A simulated high-resolution ¹H NMR spectrum of ethanol, CH₃CH₂OH. The CH₃ is split into a triplet by the two H on the CH₂. The CH₂ is split into a quartet by the three H on the CH₃, and appears furthest left because it is bonded to O. The OH is a singlet. The areas are in the ratio 3 : 2 : 1.

CheckpointAnswer before reading on.

What does the relative area (integration) of each signal in a ¹H NMR spectrum tell you?

Select one answer

Hint 1Area is proportional to number.

Hint 2Of protons in that environment.

Hint 3Ratio.

CheckpointAnswer before reading on.

In the high-resolution ¹H NMR spectrum of chloroethane, CH₃CH₂Cl, what is the splitting of the CH₃ signal?

Select one answer

Hint 1n + 1 rule.

Hint 2Neighbouring carbon has 2 H.

Hint 32 + 1 = 3.

CheckpointAnswer before reading on.

Why does the CH₂ signal in CH₃CH₂OH appear at a higher chemical shift (about 3.7 ppm) than the CH₃ signal (about 1.2 ppm)?

Select one answer

Hint 1Electronegative O.

Hint 2Pulls electron density.

Hint 3Deshielding.

CheckpointAnswer before reading on.

In the ¹H NMR spectrum of ethanol, the OH signal appears as a singlet. Why?

Select one answer

Hint 1OH hydrogens exchange rapidly.

Hint 2No coupling.

Hint 3Also does not split the CH₂.

CheckpointAnswer before reading on.

Why is tetramethylsilane (TMS) used as the reference in NMR?

Select one answer

Hint 1All its H and C are equivalent.

Hint 2Highly shielded.

Hint 3Inert and volatile.

Exam question

Hardest asked · about 7 min

4 marks

Ethyl ethanoate (CH₃COOCH₂CH₃) and methyl propanoate (CH₃CH₂COOCH₃) are isomers. Predict the high-resolution ¹H NMR spectrum of each and explain how they can be distinguished.

Hint 1Three environments in each.

Hint 2Which CH₂ is next to O?

Hint 3Which CH₃ is a singlet?

Where students lose marks on this one
  • Giving both the same spectrum.

    Why it happens: The position of the CH₂ relative to O differs.

    Compare shifts.

Written for this site.

Common mistake

A CH₃ group gives a quartet because it has three hydrogens.

Why it happens: The splitting counts the group's own hydrogens instead of its neighbours'.

Splitting comes from the H on the next carbon. CH₃ next to CH₂ is a triplet; the CH₂ next to CH₃ is the quartet.

Carbon-13 NMR

Only about 1% of carbon is ¹³C, so the spectrum is weaker. It is normally shown without splitting, as one line per carbon environment, and the peak heights do not give numbers of carbons. Shifts span about 0–220 ppm: C–C near 10–50, C–O near 50–90, C=C near 100–150, and C=O near 160–220.

The number of peaks is the number of different carbon environments. For example, propan-2-ol has two (the two CH₃ groups are equivalent) but propan-1-ol has three.

CheckpointAnswer before reading on.

How many peaks appear in the ¹³C NMR spectrum of propan-2-ol, CH₃CH(OH)CH₃?

Select one answer

Hint 1Symmetry.

Hint 2Two CH₃ groups are equivalent.

Hint 3Plus the CH.

CheckpointAnswer before reading on.

Which compound gives four peaks in its ¹³C NMR spectrum?

Select one answer

Hint 1Count unique carbons.

Hint 2Symmetry reduces the count.

Hint 3Butanone: CH₃COCH₂CH₃.

Exam question

Harder · about 5 min

3 marks

Compare the information provided by ¹H NMR and ¹³C NMR spectra.

Hint 1Both: number of environments and shifts.

Hint 2Only ¹H: integration and splitting.

Hint 3Why?

Where students lose marks on this one
  • Saying ¹³C spectra show splitting.

    Why it happens: They are recorded without splitting.

    Single peaks.

Written for this site.

Build any multiplet below. Set to the number of hydrogens on neighbouring carbons, and the signal splits into lines with heights from Pascal's triangle.

Splitting patterns in ¹H NMRA hydrogen environment with 3 neighbouring hydrogens gives a quartet with heights 1 to 3 to 3 to 1, spaced 7.0 hertz apart.1331-50-40-30-20-1001020304050offset from the centre of the signal (Hz)relative height
Each neighbouring hydrogen can be aligned with or against the field, nudging the signal up or down by J/2. With n neighbours, the number of ways to get each total gives Pascal’s triangle. The spacing J is the same in Hz on any instrument, so on a stronger magnet the multiplet looks narrower in ppm.
3
7.0 Hz
300 MHz
Pattern (n + 1 rule)
quartet, 4 lines
Height ratio
1 : 3 : 3 : 1
Line spacing
7.0 Hz = 0.0233 ppm at 300 MHz
Total width
21.0 Hz

Every slider is a normal range input, so the arrow keys move it one step and Home and End jump to the extremes.

Putting the techniques together

Worked example4 marks

Identifying C₂H₆O

A compound C₂H₆O has a molecular ion at m/z 46 and a large peak at 31. Its IR spectrum has a broad band at 3350 cm⁻¹. Its ¹H NMR spectrum has three signals with areas 3 : 2 : 1. Identify it.

List the isomers

The formula limits the options.

C₂H₆O is either ethanol, CH₃CH₂OH, or methoxymethane, CH₃OCH₃.

IR

Look for a functional group band.

The broad band at 3350 cm⁻¹ is an alcohol O–H. Methoxymethane has no O–H.

MS

Check the molar mass and a fragment.

M⁺ = 46 matches C₂H₆O. The peak at 31 is CH₂OH⁺, formed by losing CH₃ (46 − 15).

NMR

Count environments and hydrogens.

Three environments in a 3 : 2 : 1 ratio fits CH₃, CH₂ and OH. Methoxymethane is symmetrical and would give one signal.

Answer

Ethanol, CH₃CH₂OH.

Is that answer sensible?

The area ratio 3 : 2 : 1 adds to 6 hydrogens, matching the formula.

Strategy:

  1. From the formula, work out possible isomers.
  2. MS: confirm the molar mass and note the fragments.
  3. IR: find the functional groups.
  4. ¹³C NMR: count carbon environments.
  5. ¹H NMR: use shifts, areas and splitting to connect the pieces.
  6. Check that your structure fits every piece of data.

CheckpointAnswer before reading on.

Which technique would most directly distinguish pentane from 2,2-dimethylpropane, which have the same molar mass and no functional groups?

Select one answer

Hint 1IR: both only C–H and C–C.

Hint 2MS: same M⁺.

Hint 3Count environments.

Exam question

Hardest asked · about 9 min

5 marks

Compound X has formula C₃H₆O₂. IR: very broad band at 2500–3000 cm⁻¹ and strong band at 1715 cm⁻¹. Mass spectrum: molecular ion at m/z 74 and a large peak at m/z 29. ¹H NMR: 1.1 ppm (triplet, 3H), 2.4 ppm (quartet, 2H), 11.8 ppm (singlet, 1H). ¹³C NMR: 3 peaks. Identify X, explaining how each piece of evidence supports your answer.

Hint 1IR: acid.

Hint 2NMR: ethyl group.

Hint 3MS: 74 and 29.

Where students lose marks on this one
  • Naming the compound without linking each piece of evidence.

    Why it happens: Each technique must be used.

    Justify with each spectrum.

Written for this site.

What lifts this to a Band 6

In structure questions, give one piece of evidence from each spectrum and say what it shows, then state the structure. Mention symmetry when counting environments. Explain splitting by naming the neighbouring group ("triplet: next to a CH₂"). Finally, rule out a likely isomer.

Why the n + 1 rule works

Each neighbouring hydrogen is a small magnet that lines up either with or against the field. It adds to, or subtracts from, the field felt by the hydrogen being observed. With two neighbours there are four arrangements: both with, both against, and two mixed. The two mixed arrangements give the same field. So the signal splits into three lines in the ratio 1 : 2 : 1. Three neighbours give 1 : 3 : 3 : 1, following Pascal's triangle.

Why deuterated solvents

Deuterium (²H) has a nuclear spin, but its resonance frequency is very different from ¹H. So a solvent such as CDCl₃ gives no peaks in a ¹H spectrum. A small signal from traces of CHCl₃ is often seen at 7.3 ppm.