Reactions of Organic Acids and Bases
Aldehydes, ketones, carboxylic acids, amines and amides, their properties from bonding, the esterification practical, organic acids compared with organic bases, soaps and detergents, and multi-step reaction pathways.
100 min · Module 7: Organic Chemistry
Assumes you have read Alcohols.
The full teaching. Start here.
The short version
| Family | Group | Suffix | Example |
|---|---|---|---|
| Alcohol | –OH | -ol | propan-1-ol |
| Aldehyde | –CHO (C=O at the end) | -al | propanal |
| Ketone | C=O inside the chain | -one | propanone |
| Carboxylic acid | –COOH | -oic acid | propanoic acid |
| Amine | –NH₂ | -amine | propan-1-amine |
| Amide | –CONH₂ | -amide | propanamide |
| Ester | –COO– | -yl -oate | methyl ethanoate |
Boiling points at similar molar mass: alkane < ester < aldehyde, ketone < amine < alcohol < carboxylic acid < amide. Compounds that can hydrogen bond with themselves boil highest.
Esterification: acid + alcohol ⇌ ester + water. Use a concentrated H₂SO₄ catalyst and heat under reflux. Then purify with water and Na₂CO₃ washes in a separating funnel, and distil.
Carboxylic acids are weak acids: they donate H⁺. Amines are weak bases: the N lone pair accepts H⁺. Amides are neutral.
Soaps are sodium salts of fatty acids. They have a non-polar tail that dissolves in grease and an ionic head that dissolves in water, and they form micelles around the grease. Soaps form scum in hard water; detergents do not.
Pathways: work backwards from the target, and state the reagent and conditions for every arrow.
Functional groups
Aldehydes and ketones both contain the carbonyl group, C=O. In an aldehyde, the C=O is at the end of the chain with an H attached (–CHO). In a ketone, it is inside the chain, bonded to two carbons. Propanal and propanone (both C₃H₆O) are functional group isomers. Aldehydes form from primary alcohols and ketones from secondary alcohols, by oxidation.
Carboxylic acids contain –COOH at the end of the chain. The COOH carbon is counted in the name, so CH₃CH₂CH₂COOH is butanoic acid.
Amines are ammonia with alkyl groups in place of H. They are classified by the number of carbons on the N:
- primary (1°): CH₃CH₂NH₂, ethanamine;
- secondary (2°): (CH₃)₂NH, dimethylamine;
- tertiary (3°): (CH₃)₃N, trimethylamine.
Amines can be made by substituting a haloalkane with ammonia.
Amides have –CONH₂, or –CONH– for an N-substituted amide. They form when a carboxylic acid is heated with ammonia or an amine and water is lost. For example, ethanoic acid and methanamine give N-methylethanamide, CH₃CONHCH₃.
Alcohols (1°, 2° and 3°) were covered in the previous lesson.
CheckpointAnswer before reading on.
Which functional group is present in propanone?
Hint 1The name ends in -one.
Hint 2C=O in the middle of the chain.
Hint 3Not at the end.
CheckpointAnswer before reading on.
Propanal and propanone both have the formula C₃H₆O. What type of isomers are they?
Hint 1Same molecular formula.
Hint 2Different families.
Hint 3What differs?
CheckpointAnswer before reading on.
How is (CH₃)₂NH classified?
Hint 1Count the carbons bonded to N.
Hint 2Two methyl groups.
Hint 3Two alkyl groups: secondary.
CheckpointAnswer before reading on.
What forms when ethanoic acid is heated with methanamine?
Hint 1Condensation.
Hint 2OH from the acid, H from N.
Hint 3Amide link –CONH–.
Exam question
Standard · about 6 min
4 marks
Name each compound: (a) CH₃CH₂CHO (b) CH₃CH₂CH₂COOH (c) CH₃CH₂NH₂ (d) CH₃CONH₂
Hint 1Count carbons including the functional group carbon.
Hint 2Aldehyde -al, acid -oic acid.
Hint 3Amine -amine, amide -amide.
Where students lose marks on this one
Naming (b) as propanoic acid.
Why it happens: The COOH carbon is counted in the chain.
Count all four carbons.
Written for this site.
Properties from bonding
The covalent bonds inside the molecules (intramolecular) stay intact on boiling. The differences come from the forces between molecules. When molar masses are similar, dispersion forces are similar, so the functional group decides the order.
- Aldehydes, ketones and esters. A polar C=O gives dipole–dipole forces. There is no O–H or N–H, so these molecules cannot hydrogen bond with each other. They can accept hydrogen bonds from water, so small ones dissolve.
- Carboxylic acids. The C=O pulls electron density from the O–H, making it more polar, so the hydrogen bonds are stronger than in alcohols. Two acid molecules can also pair up as a dimer held by two hydrogen bonds. Acids therefore boil higher than alcohols of similar mass.
- Amines. N is less electronegative than O, so N–H hydrogen bonds are weaker than O–H ones. Amines boil lower than alcohols. Tertiary amines have no N–H, so they cannot hydrogen bond with each other and boil lowest. Lower amines are gases or volatile liquids that smell of ammonia or fish.
- Amides. Primary amides have two N–H bonds and a C=O, so they form an extensive hydrogen-bonded network. Most amides are solids at room temperature; ethanamide boils at 221 °C.
- Solubility. All of these families dissolve when the chain is short (up to about 4 or 5 carbons), because the polar group hydrogen bonds with water. Solubility falls as the non-polar chain grows. Within a family, boiling points rise with chain length as dispersion forces increase.
CheckpointAnswer before reading on.
Which lists these compounds (molar masses 58–60 g mol⁻¹) from lowest to highest boiling point?
Hint 1Butane: dispersion only.
Hint 2Propanone: dipole–dipole.
Hint 3Acid: strongest hydrogen bonding.
CheckpointAnswer before reading on.
Which compound is least soluble in water?
Hint 1Look for hydrogen bonding groups.
Hint 2Chain length matters.
Hint 3Longest non-polar part.
Exam question
Harder · about 5 min
3 marks
Ethanoic acid (60 g mol⁻¹) boils at 118 °C but propan-1-ol (60 g mol⁻¹) boils at 97 °C. Explain.
Hint 1Both hydrogen bond.
Hint 2The C=O makes the O–H more polar.
Hint 3Dimers.
Where students lose marks on this one
Saying ethanoic acid is heavier.
Why it happens: Their molar masses are equal.
Compare the forces.
Written for this site.
Exam question
Harder · about 5 min
3 marks
Propan-1-amine (59 g mol⁻¹) boils at 48 °C and trimethylamine (59 g mol⁻¹) at 3 °C, while propan-1-ol (60 g mol⁻¹) boils at 97 °C. Explain these differences.
Hint 1Which can hydrogen bond with itself?
Hint 2N is less electronegative than O.
Hint 3Tertiary amines have no N–H.
Where students lose marks on this one
Saying trimethylamine cannot dissolve in water.
Why it happens: It can accept hydrogen bonds from water.
Boiling concerns amine–amine forces.
Written for this site.
Exam question
Harder · about 4 min
2 marks
Ethanamide, CH₃CONH₂ (59 g mol⁻¹), is a solid that boils at 221 °C. Explain why its boiling point is so much higher than that of propan-1-amine (48 °C).
Hint 1Amides have C=O and N–H.
Hint 2Two N–H hydrogens.
Hint 3Extensive network.
Where students lose marks on this one
Saying amides are ionic.
Why it happens: They are covalent molecules.
Stronger hydrogen bonding explains it.
Written for this site.
Making esters
Esterification is a condensation reaction: the OH of the acid and the H of the alcohol leave as water.
Naming. The alcohol part comes first as an alkyl group, and the acid part becomes -oate. Propan-1-ol with ethanoic acid gives propyl ethanoate.
Method.
- Mix the acid and alcohol in a round-bottom flask, with one in excess. Add a few drops of concentrated H₂SO₄ and some boiling chips.
- Heat under reflux with a heating mantle for about 30 minutes. The vertical condenser returns evaporated reactants and ester to the flask. So the mixture can be heated for a long time (faster reaction) without losing volatile substances. The mantle avoids an open flame near flammable vapours. The boiling chips prevent bumping.
- Pour the cooled mixture into a separating funnel and wash with water. This removes H₂SO₄ and most of the unreacted alcohol and acid. The ester forms the upper, organic layer.
- Wash with Na₂CO₃(aq) to convert the remaining acid into a soluble salt. Vent the CO₂ often. Discard the aqueous layer.
- Distil, and collect the fraction at the ester's boiling point (77 °C for ethyl ethanoate).
Role of concentrated H₂SO₄. It is a catalyst, so equilibrium is reached faster. It is also a dehydrating agent: it absorbs water, which shifts the equilibrium to the right. The excess reactant also shifts the equilibrium right.
Worked example3 marks
Percentage yield of ethyl ethanoate
6.00 g of ethanoic acid (60.05 g mol) is refluxed with excess ethanol, and 5.28 g of ethyl ethanoate (88.10 g mol) is collected. Find the percentage yield.
Limiting reagent
Ethanol is in excess, so the acid decides the yield.
mol.
Theoretical mass
The acid and the ester are in a 1 : 1 ratio.
g.
Percentage yield
Actual mass ÷ theoretical mass × 100.
.
Answer
60.0%.
Is that answer sensible?
The reaction reaches equilibrium, and some ester is lost in the washes and in distillation. So a yield well below 100% is expected.
CheckpointAnswer before reading on.
What ester forms from propan-1-ol and ethanoic acid?
Hint 1Alkyl part from the alcohol.
Hint 2Alkanoate part from the acid.
Hint 3Alcohol named first.
CheckpointAnswer before reading on.
Why is esterification carried out under reflux?
Hint 1Reactants are volatile.
Hint 2Reaction is slow.
Hint 3Heat without loss.
CheckpointAnswer before reading on.
Why is sodium carbonate solution added to the crude ester in a separating funnel?
Hint 1What acidic impurity remains?
Hint 2Carbonate reacts with acids.
Hint 3The salt is ionic.
Exam question
Harder · about 8 min
5 marks
Describe the preparation of ethyl ethanoate in a school laboratory, including the purpose of each condition.
Hint 1Reactants and catalyst.
Hint 2Reflux and why.
Hint 3Purification: separating funnel, carbonate, distillation.
Where students lose marks on this one
Saying reflux removes the product.
Why it happens: Reflux returns vapour to the flask.
Distillation removes; reflux returns.
Written for this site.
Exam question
Harder · about 6 min
3 marks
6.00 g of ethanoic acid (60.05 g mol) is refluxed with excess ethanol, and 5.28 g of ethyl ethanoate (88.10 g mol) is collected. Calculate the percentage yield.
Hint 1n(acid) = 6.00 / 60.05.
Hint 2Ratio 1 : 1.
Hint 3Yield = actual / theoretical × 100.
Where students lose marks on this one
Using the mass of ethanol, which is in excess.
Why it happens: The limiting reagent decides the theoretical yield.
Use the acid.
Written for this site.
Exam question
Harder · about 5 min
3 marks
Explain why the yield of ester in the previous question was well below 100%, and how it could be increased.
Hint 1Equilibrium.
Hint 2Losses in purification.
Hint 3Le Chatelier.
Where students lose marks on this one
Saying the catalyst increases the yield.
Why it happens: A catalyst speeds up both directions; H₂SO₄ helps only by absorbing water.
Distinguish rate from yield.
Written for this site.
Common mistake
Reflux removes the ester from the flask as it forms.
Why it happens: Reflux and distillation both use a condenser.
In reflux, the condenser is vertical, so vapour condenses and drips back into the flask. In distillation, the condenser slopes away, so the vapour is collected in a separate flask. Esterification uses reflux first, then distillation to purify.
Organic acids and organic bases
Carboxylic acids are weak Brønsted–Lowry acids. They partially ionise:
They are monoprotic: only the H of the COOH ionises. They react like other acids:
- with bases, giving a salt and water;
- with reactive metals, giving a salt and H₂;
- with carbonates, giving a salt, H₂O and CO₂. The fizzing distinguishes them from alcohols.
Electronegative atoms on the chain make them stronger acids. For example, chloroethanoic acid is stronger than ethanoic acid.
Amines are weak Brønsted–Lowry bases. The lone pair on N accepts a proton:
With acids, amines form ionic ammonium salts, such as CH₃NH₃⁺Cl⁻. These salts are solids with high melting points and are much more soluble in water than the amine.
Amides are neutral. The C=O draws the N lone pair into the C–N bond, so the lone pair is not free to accept a proton.
| Organic acid (carboxylic acid) | Organic base (amine) | |
|---|---|---|
| Group | –COOH | –NH₂, –NHR, –NR₂ |
| Behaviour | donates H⁺ | accepts H⁺ with the N lone pair |
| Strength | weak, pH about 3 at 0.1 mol L | weak, pH about 11 to 12 at 0.1 mol L |
| Litmus | turns blue litmus red | turns red litmus blue |
| Na₂CO₃ | fizzes (CO₂) | no reaction |
CheckpointAnswer before reading on.
A 0.10 mol L ethanoic acid solution () has a pH of about:
Hint 1Weak acid, partial ionisation.
Hint 2.
Hint 3Compare with 1.0 for HCl.
CheckpointAnswer before reading on.
Methanamine reacts with hydrochloric acid. What is the product?
Hint 1Amine is a base.
Hint 2N accepts H⁺.
Hint 3Ionic salt.
CheckpointAnswer before reading on.
Which observation shows that propanoic acid is an acid but propan-1-ol is not?
Hint 1Carbonate test.
Hint 2Gas produced.
Hint 3Alcohols do not react.
CheckpointAnswer before reading on.
Why are amides, unlike amines, not basic?
Hint 1Where is the lone pair?
Hint 2The C=O is next to the N.
Hint 3Electron withdrawal.
Exam question
Harder · about 6 min
4 marks
Compare the acid–base behaviour of ethanoic acid and ethanamine in water, including equations.
Hint 1The acid donates H⁺ from the COOH.
Hint 2The amine accepts H⁺ with its lone pair.
Hint 3Both are weak.
Where students lose marks on this one
Writing the amine releasing OH⁻ from its own structure.
Why it happens: The OH⁻ comes from water after the amine takes H⁺.
Show proton transfer.
Written for this site.
Soaps and detergents
Structure. A soap is the sodium or potassium salt of a long-chain fatty acid, such as sodium stearate, C₁₇H₃₅COO⁻Na⁺. It has:
- a long non-polar hydrocarbon tail, which is hydrophobic and forms dispersion forces with grease;
- an ionic carboxylate head, which is hydrophilic and forms ion–dipole forces with water.
Cleaning action. The tails dissolve in the grease and the heads stay in the water. When the water is agitated, the grease is lifted off and surrounded by soap particles to form a micelle, with the heads facing outward. The negatively charged micelles repel one another, so the grease stays suspended as an emulsion and is rinsed away. Soaps also lower the surface tension of water, so it wets surfaces better.
Saponification. A fat or oil is a triglyceride, an ester of glycerol and three fatty acids. Boiling it with concentrated NaOH hydrolyses the ester links:
Adding concentrated NaCl makes the soap precipitate ("salting out"), because the extra Na⁺ lowers its solubility. The glycerol stays in solution.
Detergents are synthetic surfactants with the same head-and-tail structure:
- anionic: a sulfonate head, –SO₃⁻, as in laundry powders;
- cationic: a quaternary ammonium head, –N(CH₃)₃⁺, as in fabric softeners and disinfectants;
- non-ionic: a polar polyether head with OH groups, which is low-foaming and used in dishwasher products.
| Soap | Detergent | |
|---|---|---|
| Hard water (Ca²⁺, Mg²⁺) | forms insoluble scum, so cleans less well | its calcium and magnesium salts are soluble, so no scum |
| Acidic water | precipitates as the fatty acid | still works |
| Source | renewable fats and oils | mainly petrochemicals |
| Biodegradability | readily biodegradable | branched chains break down slowly; modern detergents use linear chains |
CheckpointAnswer before reading on.
Why do soaps work poorly in hard water, while anionic detergents still work?
Hint 1Hard water: Ca²⁺ and Mg²⁺.
Hint 2Soap forms an insoluble salt.
Hint 3Sulfonate salts are soluble.
CheckpointAnswer before reading on.
Which describes a cationic detergent?
Hint 1Cation: positive head.
Hint 2Often a quaternary ammonium ion.
Hint 3Long chain.
Exam question
Standard · about 5 min
3 marks
Describe the structure of a soap such as sodium stearate, C₁₇H₃₅COONa, and explain how it removes grease.
Hint 1Two ends: head and tail.
Hint 2Tail dissolves in grease.
Hint 3Micelles.
Where students lose marks on this one
Saying the tail dissolves in water.
Why it happens: The tail is hydrophobic.
Head in water, tail in grease.
Written for this site.
Exam question
Harder · about 5 min
3 marks
Describe how soap is made from a fat, including a word or chemical equation, and explain how the soap is separated.
Hint 1Fat is a triglyceride ester.
Hint 2Hydrolysis with NaOH.
Hint 3Salting out.
Where students lose marks on this one
Calling the fat a carboxylic acid.
Why it happens: Fats are esters.
Saponification is ester hydrolysis.
Written for this site.
Exam question
Hardest asked · about 5 min
3 marks
What mass of sodium stearate (306.45 g mol) can be made from 100 g of glyceryl tristearate (891.45 g mol) with excess NaOH?
Hint 1n(fat) = 100 / 891.45.
Hint 2Each fat molecule gives three soap particles.
Hint 3m = nM.
Where students lose marks on this one
Using a 1 : 1 ratio.
Why it happens: Each triglyceride has three ester links.
Multiply by 3.
Written for this site.
Reaction pathways
To plan a synthesis, work backwards from the target: which reaction makes it, and from what? Then write the forward chain, with reagents and conditions on every arrow.
Target: ethyl ethanoate, from ethene only.
- Ethene + H₂O, with a H₃PO₄ or dilute H₂SO₄ catalyst and heat, gives ethanol.
- Some of the ethanol is heated under reflux with acidified K₂Cr₂O₇, giving ethanoic acid.
- Ethanol + ethanoic acid, with a concentrated H₂SO₄ catalyst under reflux, gives ethyl ethanoate + H₂O.
Useful links from this module:
| From | To | Reagent and conditions |
|---|---|---|
| alkene | alkane | H₂, Ni or Pt catalyst, heat |
| alkene | haloalkane | HX, room temperature |
| alkene | alcohol | H₂O, acid catalyst, heat |
| alkane | haloalkane | X₂, UV light |
| haloalkane | alcohol | NaOH(aq), reflux |
| alcohol | alkene | conc. H₂SO₄, heat |
| 1° alcohol | aldehyde | acidified K₂Cr₂O₇, distil |
| 1° alcohol | carboxylic acid | acidified K₂Cr₂O₇, reflux |
| 2° alcohol | ketone | acidified K₂Cr₂O₇, heat |
| acid + alcohol | ester | conc. H₂SO₄, reflux |
| acid + amine | amide | heat |
| fat + NaOH | soap + glycerol | boil |
Worked example4 marks
A flow chart from ethane to ethyl ethanoate
Construct a flow chart for making ethyl ethanoate using ethane as the only carbon source. Give the reagents and conditions for every step, then explain why the route from ethene above is preferred.
Work backwards
The ester needs an alcohol and a carboxylic acid, both with two carbons.
Ethyl ethanoate ← ethanol + ethanoic acid. Ethanoic acid ← ethanol (oxidation). Ethanol ← chloroethane (substitution with NaOH). Chloroethane ← ethane (substitution with Cl₂).
The flow chart
Write the forward chain with conditions on each arrow.
| Step | From | Reagents and conditions | To |
|---|---|---|---|
| 1 | ethane | Cl₂, UV light | chloroethane |
| 2 | chloroethane | NaOH(aq), reflux | ethanol |
| 3 | part of the ethanol | acidified K₂Cr₂O₇, reflux | ethanoic acid |
| 4 | ethanol + ethanoic acid | conc. H₂SO₄ catalyst, reflux | ethyl ethanoate + H₂O |
The route splits after step 2 and rejoins at step 4, so it is convergent at the end.
Evaluate
Compare the first steps of the two routes.
Step 1 is substitution, which gives a mixture of chloroethanes that must be separated, lowering the yield. Hydrating ethene gives ethanol in one step with only one possible product, so the ethene route is shorter and wastes less material.
Answer
Ethane → chloroethane (Cl₂, UV) → ethanol (NaOH(aq), reflux); part of the ethanol → ethanoic acid (acidified K₂Cr₂O₇, reflux); ethanol + ethanoic acid → ethyl ethanoate (conc. H₂SO₄, reflux). The ethene route is preferred because it avoids the mixture formed by substitution.
Always check for Markovnikov's rule. Adding water to propene gives mainly propan-2-ol, which oxidises to propanone, not propanoic acid.
CheckpointAnswer before reading on.
Which sequence converts ethene into ethanal?
Hint 1Two steps.
Hint 2First make an alcohol.
Hint 3Then partial oxidation.
Exam question
Harder · about 7 min
4 marks
Construct a reaction pathway flowchart for producing ethyl ethanoate using ethene as the only organic starting material. Include reagents and conditions for each step.
Hint 1Ethene → ethanol.
Hint 2Ethanol → ethanoic acid.
Hint 3Combine the two.
Where students lose marks on this one
Oxidising ethanol by distillation.
Why it happens: That stops at ethanal.
Reflux gives the acid.
Written for this site.
Exam question
Hardest asked · about 6 min
3 marks
A student plans: propene → (hydration) → propan-1-ol → (oxidation) → propanoic acid. Evaluate the plan and propose a working pathway from propene.
Hint 1Markovnikov’s rule.
Hint 2What does hydration of propene mainly give?
Hint 3Can the isomers be separated?
Where students lose marks on this one
Assuming water adds to give only propan-1-ol.
Why it happens: The H adds to the carbon with more H.
Apply Markovnikov.
Written for this site.
Common mistake
Propene + water → propan-1-ol → propanoic acid.
Why it happens: The pathway is written without checking which alcohol forms.
Water adds by Markovnikov's rule, so the major product is propan-2-ol. It is a secondary alcohol, so it oxidises to propanone. Check the class of every alcohol in a pathway before you oxidise it.
What lifts this to a Band 6
For any comparison of properties, name the specific forces in each compound and say which is stronger and why. Hold molar mass or chain length constant when you compare families. For the ester practical, give the purpose of each step, not just the step itself.
Why carboxylic acids are acidic but alcohols are not
When a carboxylic acid loses H⁺, the negative charge on the carboxylate ion is spread over both O atoms (delocalised). This stabilises the ion, so ionisation is more favourable. The alkoxide ion from an alcohol has its charge on a single O, so alcohols barely ionise. An electronegative chlorine on the chain pulls electron density further, stabilising the carboxylate even more. That is why chloroethanoic acid is stronger than ethanoic acid.
Why the amide N is not basic
The N lone pair in an amide overlaps with the C=O π bond, giving the C–N bond partial double-bond character. The amide link is therefore flat and rigid. This matters in proteins and nylon, and it also means the lone pair is not available to take a proton.