The Scalar Product and Vector Proofs
The scalar product of three-dimensional vectors in component form and as |u||v|cos θ, using it for angles, perpendicularity and projections, and proving geometric results in the plane and in space with vectors.
55 min · Vectors
Assumes you have read Vectors in Three Dimensions and The Scalar Product and Projection.
The full teaching. Start here.
The short version
- , where .
- The answer is a number.
- Perpendicular (non-zero vectors).
- . Use this to turn lengths into dot products and expand.
- Angle: . For an angle at a vertex, both vectors must start at that vertex.
- Proof toolkit: parallel means a scalar multiple, perpendicular means a zero dot product, and equal length means equal squared magnitudes.
The scalar product in three dimensions
- Scalar (dot) product
For and , . Geometrically, , where is the angle between the vectors when they are placed tail to tail.
It obeys the rules you would hope for: , , and . It is not associative, because has no meaning.
Worked example3 marks
Where the component formula comes from
(a) Using and (and the same for the other pairs), show that . (b) Find so that is perpendicular to .
(a) Expand
Distributive law, nine terms.
has nine terms. The six mixed terms such as are , and the three matched terms give .
(b) Set the dot product to zero
Perpendicular non-zero vectors.
, so .
Answer
(a) Shown. (b) .
Is that answer sensible?
.
CheckpointAnswer before reading on.
Find .
Hint 1Multiply matching components.
Hint 2.
Hint 312.
CheckpointAnswer before reading on.
Which of these is not a valid expression for vectors , , ?
Hint 1What type does a dot product return?
Hint 2A scalar.
Hint 3Can you dot a scalar with a vector?
CheckpointAnswer before reading on.
For any vector , equals
Hint 1Angle between a and itself.
Hint 2.
Hint 3Sum of squares of components.
CheckpointAnswer before reading on.
Which is true?
Hint 1The unit vectors are mutually perpendicular.
Hint 2.
Hint 3Each has length 1.
CheckpointAnswer before reading on.
Find such that and are perpendicular.
Hint 1Perpendicular means dot product zero.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
If for non-zero vectors, the angle between them is
Hint 1Sign of .
Hint 2Negative cosine.
Hint 3Between 90° and 180°.
Angles in three dimensions
Worked example3 marks
An angle in a triangle in space
, and . Find to the nearest tenth of a degree.
Vectors from the vertex B
The angle is at B, so both vectors start at B.
and .
Dot product and magnitudes
Both forms of the scalar product.
, , .
Angle
Rearrange u · v = |u||v| cos θ.
, so .
Answer
.
Is that answer sensible?
The dot product is positive, so the angle must be acute. It is.
CheckpointAnswer before reading on.
Find the angle between and , in degrees correct to 1 decimal place.
Hint 1Dot product 4.
Hint 2Both magnitudes 3.
Hint 3.
CheckpointAnswer before reading on.
Find the angle between a body diagonal of a cube and one of its edges, in degrees correct to 1 decimal place.
Hint 1Use and .
Hint 2Dot product 1.
Hint 3.
CheckpointAnswer before reading on.
Find the acute angle between two body diagonals of a cube, in degrees correct to 1 decimal place.
Hint 1Use and .
Hint 2Dot product 1.
Hint 3.
Exam question
Standard · about 4 min
3 marks
, and . Find in degrees, correct to 1 decimal place.
Hint 1Both vectors must start at .
Hint 2, .
Hint 3.
Where students lose marks on this one
Using BA with AC.
Why it happens: Vectors pointing in different senses from A.
Both vectors must point away from the vertex.
Written for this site.
Exam question
Standard · about 3 min
2 marks
Show that the triangle with vertices , and is right-angled.
Hint 1Try the vectors from each vertex.
Hint 2, .
Hint 3Their dot product is 0.
Where students lose marks on this one
Showing the dot product is zero for vectors not sharing a vertex.
Why it happens: Using AB and BC then concluding about A.
The right angle is at the shared vertex.
Written for this site.
Exam question
Standard · about 3 min
2 marks
Find the scalar projection of onto , correct to 2 decimal places.
Hint 1.
Hint 2Dot product 6.
Hint 3.
Where students lose marks on this one
Dividing by |b|² for the scalar projection.
Why it happens: Mixing scalar and vector projection.
Scalar: divide by |b|; vector: divide by |b|² and multiply by b.
Written for this site.
Exam question
Harder · about 4 min
3 marks
Let and . Write as the sum of a vector parallel to and a vector perpendicular to .
Hint 1Project a onto b.
Hint 2.
Hint 3The remainder is a minus the projection.
Where students lose marks on this one
Stopping after the projection.
Why it happens: Incomplete decomposition.
Both parts are needed, and checking perpendicularity confirms them.
Written for this site.
Common mistake
For ∠ABC, use AB and BC.
Why it happens: AB points into B and BC points out of it, so the formula gives the exterior angle, 180° − ∠ABC.
Both vectors must point away from the vertex: and . If your angle comes out obtuse when the triangle looks acute, check this first.
Proving results with vectors
A vector proof turns a geometric statement into algebra you can check:
| Geometric fact | Vector statement |
|---|---|
| is the midpoint of |
Choose the origin to make the algebra simple, often at a centre or a vertex.
Worked example3 marks
A proof in the plane: the angle in a semicircle
is a diameter of a circle with centre , and is another point on the circle. Prove that .
Set up
Origin at the centre.
Let and . Then , and since both are radii.
Vectors from C
The angle is at C.
and .
Dot product
Expand; the cross terms cancel.
.
Answer
, so .
Is that answer sensible?
Every line of the proof used only equal radii, which is exactly the hypothesis of the theorem.
Worked example3 marks
A proof in three dimensions: midpoints of a skew quadrilateral
, , and are any four points in space, not necessarily in one plane. , , and are the midpoints of , , and . Prove that is a parallelogram.
Midpoints
Average of position vectors.
, , , .
Opposite sides
Subtract.
and .
Answer
, so and are parallel and equal in length. A quadrilateral with one pair of opposite sides parallel and equal is a parallelogram.
Is that answer sensible?
The vectors show that , , and lie in one plane even when , , and do not, which is not obvious from a sketch.
Exam question
Standard · about 3 min
2 marks
Prove that .
Hint 1Write the square as a dot product with itself.
Hint 2Expand using the distributive law.
Hint 3.
Where students lose marks on this one
Writing |a + b|² = |a|² + |b|².
Why it happens: Treating magnitudes as additive.
The cross term 2a · b is what makes the cosine rule.
Written for this site.
Exam question
Standard · about 3 min
2 marks
Using the previous result, prove that if and only if (for non-zero vectors). Which theorem is this?
Hint 1Compare with the expansion.
Hint 2Equality iff .
Hint 3Right triangle.
Where students lose marks on this one
Proving only one direction.
Why it happens: Ignoring "if and only if".
The single chain of equivalences gives both.
Written for this site.
Exam question
Harder · about 5 min
3 marks
In triangle , let and , with . Use vectors to prove the cosine rule .
Hint 1.
Hint 2Square it as a dot product.
Hint 3.
Where students lose marks on this one
Sign error: +2a · b.
Why it happens: Expanding (b − a)·(b − a) carelessly.
The cross terms are both −a · b.
Written for this site.
Exam question
Standard · about 4 min
3 marks
is a rhombus with and . Prove that its diagonals are perpendicular.
Hint 1Diagonals: and .
Hint 2Take their dot product.
Hint 3Rhombus: equal sides.
Where students lose marks on this one
Not stating where |a| = |c| comes from.
Why it happens: Skipping the key property.
Name the rhombus property you use.
Written for this site.
Exam question
Harder · about 5 min
3 marks
is a chord of a circle with centre , and is the midpoint of . Let and . Prove that .
Hint 1.
Hint 2.
Hint 3Radii: .
Where students lose marks on this one
Assuming OM is perpendicular because it looks it.
Why it happens: Using the result being proved.
Only the equal radii may be assumed.
Written for this site.
Exam question
Standard · about 4 min
3 marks
In triangle , , , and , are the midpoints of and . Prove that and .
Hint 1.
Hint 2.
Hint 3Compare with AB.
Where students lose marks on this one
Concluding only parallel.
Why it happens: Missing the length part.
The scalar 1/2 gives the length too.
Written for this site.
Exam question
Standard · about 3 min
2 marks
Prove that , and interpret the result for a parallelogram.
Hint 1Expand both as dot products.
Hint 2Cross terms cancel.
Hint 3a + b and a − b are the diagonals.
Where students lose marks on this one
Interpreting it as a statement about the sides only.
Why it happens: Not identifying a ± b as diagonals.
Draw the parallelogram.
Written for this site.
Exam question
Harder · about 5 min
3 marks
Triangle has position vectors , , . is the point with position vector . Prove that lies on the median from , two-thirds of the way from to the midpoint of .
Hint 1.
Hint 2Find and .
Hint 3Show .
Where students lose marks on this one
Computing OG and OM and comparing those.
Why it happens: Using position vectors instead of displacements.
Compare displacements from A.
Written for this site.
Exam question
Harder · about 7 min
4 marks
is a regular tetrahedron with , , . (a) Explain why . (b) Prove that the opposite edges and are perpendicular.
Hint 1Every face is equilateral.
Hint 2The angle between any two of is .
Hint 3.
Where students lose marks on this one
Assuming OA and BC intersect.
Why it happens: Thinking perpendicular requires meeting.
In 3D, perpendicular directions need not intersect (skew lines).
Written for this site.
Exam question
Harder · about 3 min
2 marks
Prove that and state when equality holds.
Hint 1.
Hint 2.
Hint 3Equality when cos θ = ±1.
Where students lose marks on this one
Forgetting the zero vector case.
Why it happens: θ is undefined for the zero vector.
Treat it separately.
Written for this site.
What lifts this to a Band 6
State every geometric fact you use, and say where it comes from ("since and are radii, "). In vector proofs the algebra is usually short. Most marks are lost by leaving the key property unstated, or by concluding "parallel" without a scalar multiple written down.
Perpendicular without meeting
In the plane, two perpendicular lines always meet. In space they need not. In a regular tetrahedron the opposite edges and have perpendicular directions (), but the edges never touch. Lines that are not parallel and do not meet are called skew. The dot product measures only the angle between directions, which is why it works whether or not the lines intersect. Deciding whether two lines actually meet needs the vector equations of lines, covered in a later lesson.