Areas Between Curves and Volumes of Revolution
Finding the area between two curves, picturing the solid made by rotating a region about an axis, and calculating its volume with discs and washers about the x-axis or the y-axis.
55 min · Calculus
Assumes you have read Integration by Substitution.
The full teaching. Start here.
The short version
Area between curves: , with and usually the intersection points. Split wherever the curves cross.
Volume about the -axis: .
Volume about the -axis: (write in terms of ; use limits).
Between two curves (washers): , where is the outer radius and the inner. Not .
Area between two curves
The area under minus the area under is the area between them:
This works even if part of the region lies below the -axis: shifting both curves up by the same amount changes neither the region nor the difference . What matters is only which curve is on top. If the curves cross inside the interval, split there.
Worked example3 marks
Area between a parabola and a line
Find the area enclosed between and .
Intersections
These are the limits of the enclosed region.
gives , so or .
Which is on top
Test a point between the intersections.
At : line , parabola . The line is on top.
Integrate top minus bottom
One integral covers the whole region because the curves do not cross between 0 and 3.
.
Answer
square units.
Is that answer sensible?
Part of the region is below the -axis (the parabola is negative on ), but no splitting was needed: the formula only cares which curve is on top.
CheckpointAnswer before reading on.
On , . The area between the curves is:
Hint 1Top minus bottom.
Hint 2This works even when curves are below the axis.
Hint 3The difference is always non-negative.
CheckpointAnswer before reading on.
Find the area enclosed between and , to four decimal places.
Hint 1Intersections: , so .
Hint 2Between them, .
Hint 3.
CheckpointAnswer before reading on.
Find the area bounded by , and , to four decimal places.
Hint 1 at .
Hint 2.
Hint 3.
Exam question
Standard · about 5 min
3 marks
Find the area enclosed between and .
Hint 1 gives .
Hint 2 or .
Hint 3.
Where students lose marks on this one
Integrating each curve with different limits.
Why it happens: Treating it as two separate areas under curves.
Use one integral of top minus bottom between the intersections.
Written for this site.
Common mistake
Integrating straight across a point where the curves cross, or where a single curve crosses the x-axis.
Why it happens: The positive and negative parts cancel.
If the top curve changes, the integrand changes sign and the pieces cancel. , but the region clearly has area. Find every crossing and split there.
CheckpointAnswer before reading on.
Find the total area enclosed between and .
Hint 1They meet at .
Hint 2On , ; on , .
Hint 3Two integrals, or use symmetry.
CheckpointAnswer before reading on.
Find the area between and the -axis from to , to four decimal places.
Hint 1The curve is below the axis on .
Hint 2Split at x = 2.
Hint 3.
Exam question
Harder · about 5 min
3 marks
Find the area enclosed between and from to , to four decimal places.
Hint 1Here .
Hint 2.
Hint 3.
Where students lose marks on this one
Getting $-2\sqrt{2}$.
Why it happens: Cosine minus sine.
Check which is on top at the midpoint, x = π/2.
Written for this site.
Sometimes it is easier to integrate with respect to : use right minus left, with written in terms of and limits.
CheckpointAnswer before reading on.
Find the area enclosed between the curve and the line , by integrating with respect to . Give the answer to four decimal places.
Hint 1The line meets the curve at .
Hint 2Right minus left: .
Hint 3.
Solids of revolution
Rotate a region a full turn about an axis and it sweeps out a solid. To picture it, reflect the curve in the axis and join the two copies with circles (drawn as ellipses in perspective).
The volume comes from slicing, just as area came from thin rectangles. A slice perpendicular to the axis at position is a disc of radius and thickness , so
Common shapes to recognise: a horizontal line gives a cylinder, a line through the origin gives a cone, a semicircle gives a sphere.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. What solid is formed?
Hint 1Every slice has the same radius.
Hint 2Radius 3, length 5.
Hint 3Volume 45π.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. The volume is:
Hint 1Each slice is a disc of radius y.
Hint 2Disc volume .
Hint 3Sum and take the limit.
Worked example4 marks
Rotating about each axis
The region bounded by , the -axis and the line , with , is rotated about the -axis. (a) Describe the solid. (b) Find its volume.
(a) Picture it
Rotating the right half of a parabola about its axis of symmetry.
The solid is a bowl (a paraboloid), with its lowest point at the origin, depth , and a circular top of radius at .
(b) Slice horizontally
Slices perpendicular to the y-axis are discs of radius x and thickness δy.
with .
Integrate
The limits are y values.
.
Answer
(a) A bowl of depth and top radius . (b) cubic units.
Is that answer sensible?
The enclosing cylinder has volume . A paraboloid fills exactly half its cylinder (Archimedes found this), and is half.
CheckpointAnswer before reading on.
The region between a curve and the -axis from to is rotated about the -axis. The volume is:
Hint 1Slices are now horizontal.
Hint 2The radius is the x value.
Hint 3Integrate with respect to y.
CheckpointAnswer before reading on.
The region between , the -axis and the line is rotated about the -axis. What solid is formed?
Hint 1Slices are horizontal discs of radius x.
Hint 2 grows from 0 to 2.
Hint 3Radius grows linearly with height.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region between (), the -axis and the line is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
The region under from to is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
The familiar volume formulae all come from this method.
Exam question
Standard · about 5 min
3 marks
The line for is rotated about the -axis. Show that the volume of the cone formed is . (3 marks)
Hint 1.
Hint 2.
Hint 3.
Where students lose marks on this one
Treating r and h as variables.
Why it happens: Confusing constants with the variable.
Only x varies; r and h are constants.
Written for this site.
Exam question
Standard · about 5 min
3 marks
The semicircle is rotated about the -axis. Describe the solid and show that its volume is . (3 marks)
Hint 1.
Hint 2Limits to .
Hint 3Use symmetry.
Where students lose marks on this one
Using limits 0 to r only.
Why it happens: Getting half a sphere.
The semicircle runs from x = −r to x = r.
Written for this site.
Exam question
Harder · about 5 min
3 marks
The region between , the -axis, and the lines and is rotated about the -axis. Find the volume to four decimal places.
Hint 1.
Hint 2.
Hint 3.
Where students lose marks on this one
Integrating $(\ln x)^{2}$.
Why it happens: Using the x-axis formula.
Rotation about the y-axis needs x in terms of y.
Written for this site.
3D model
A region of the plane turned about the x-axis. Drag the sweep from 0° to 360° to watch the flat region become a solid, then move the slice along the axis. Every cross-section at right angles to the axis is a circle (a disc) of radius y, or a ring (a washer) when the region lies between two curves, so the volume is the integral of those circular areas.
The model turns the region under from to about the -axis. Drag the angle to to see the flat region, then up to to see the full solid of volume . The orange slice is one disc of radius , and the volume integral adds the areas of all such discs.
Choose the other regions to compare shapes. The last option, between and , has a hole down the middle: each slice is a washer, which is the case the next section deals with.
Rotating the region between two curves
If the region does not touch the axis, each slice is a washer: a disc with a hole in it. Its area is the big disc minus the small one, .
Here and are distances from the axis of rotation to the far and near curves.
Worked example3 marks
A washer about the x-axis
The region between and is rotated about the -axis. Find the volume.
Intersections
These bound the region.
gives , so or .
Outer and inner radii
At x = 1, root x = 1 and x/2 = 0.5, so the root curve is further from the axis.
and .
Integrate
Square each radius separately, then subtract.
.
Answer
cubic units.
Is that answer sensible?
The outer solid alone (from ) is , and the inner cone has volume . The difference is .
CheckpointAnswer before reading on.
The region between (outer) and (inner) is rotated about the -axis. Which formula gives the volume?
Hint 1Each slice is a washer: a disc with a hole.
Hint 2Big disc minus small disc.
Hint 3.
CheckpointAnswer before reading on.
The region between and is rotated about the -axis. Find the volume to four decimal places.
Hint 1Outer radius , inner radius on .
Hint 2.
Hint 3.
Exam question
Harder · about 5 min
3 marks
The region between and is rotated about the -axis. Find the volume to four decimal places.
Hint 1In terms of : and .
Hint 2For , , so is the outer radius.
Hint 3.
Where students lose marks on this one
Choosing the wrong outer radius.
Why it happens: Assuming the parabola is outer because it was lower before.
Measure radius as distance from the y-axis at each height.
Written for this site.
Exam question
Harder · about 6 min
3 marks
The region between and is rotated about the -axis. Find the volume to four decimal places.
Hint 1Intersections at .
Hint 2Outer radius , inner radius .
Hint 3.
Where students lose marks on this one
Using $\pi\int(1-x^{2})^{2}dx$.
Why it happens: Squaring the gap between the curves.
The axis of rotation is y = 0, so radii are 4 − x² and 3.
Written for this site.
What lifts this to a Band 6
The check in the worked example is worth copying in exams: a washer volume is always (outer solid) minus (inner solid). If you can find each separately, or recognise one as a cone or cylinder, you have a second method that catches errors.
Real-life containers
Vases, bowls and funnels are solids of revolution. Rotating about the -axis matches a container standing upright, and a volume to depth uses as the upper limit.
CheckpointAnswer before reading on.
A bowl is formed by rotating (units in cm) about the -axis. Find the volume of water in the bowl when the depth is cm, to four decimal places.
Hint 1.
Hint 2.
Hint 3.
CheckpointAnswer before reading on.
For the bowl formed by rotating about the -axis, the volume of water at depth cm is . Find the depth when the bowl holds , to four decimal places.
Hint 1.
Hint 2.
Hint 3.
Cavalieri and the sphere
Archimedes found the volume of a sphere before calculus existed. His idea, later made precise by Cavalieri: two solids with equal cross-sectional areas at every height have equal volumes. A hemisphere of radius , sliced at height , has cross-section . A cylinder of radius and height with a cone removed has cross-section . They match. So the hemisphere is the cylinder minus the cone, , and a sphere is . The integral is the same argument written in the language of calculus.